液壓式機械手設計


1 緒論………………………………………………………………… 1
1.1機械手的分類……………………………………………………… 2
1.2機械手的組成……………………………………………………… 4
1.3應用機械手的意義 ……………………………………………… 6
2 總體技術方案及系統的組成 ……………………………………… 8
2.1原始數據 ………………………………………………………… 8
2.2工作要求 ……………………………………………………………8
2.3系統組成 ………………………………………………………… 8
2.4總體技術方案 …………………………………………………… 9
2.4.1動作分析………………………………………………………9
2.4.2手部…………………………………………………………10
3 機械手的液壓部分………………………………………………… 11
3.1 液壓系統的工作原理………………………………………………11
3.2 液壓傳動的工作特性………………………………………………11
3.3 液壓系統的組成……………………………………………………11
3.4 液壓系統的優、缺點………………………………………………12
3.5液壓系統原理圖……………………………………………………14
3.6液壓系統電磁鐵動作順序表………………………………………14
3.7液壓系統工作原理…………………………………………………15
4 回轉裝置的總體組成及結構設計………………………………… 18
4.1回轉裝置組成………………………………………………………18
4.1.1執行件………………………………………………………18
4.1.2傳遞件………………………………………………………18
4.1.3驅動件………………………………………………………18
4.1.4控制系統……………………………………………………19
5 機械傳動方案………………………………………………………20
5.1小車的主要組成部分………………………………………………20
5.2同步帶傳動方式優缺點……………………………………………20
5.3驅動動力源…………………………………………………………21
5.4機械傳動方案的設計計算…………………………………………21
5.4.1設計數據確定………………………………………………21
5.4.2同步帶結構的設計計算 ……………………………………23
6 零件的加工編程……………………………………………………25
6.1數控車床加工程序編制基礎………………………………………25
6.2程序的編制…………………………………………………………26
7 結束與展望………………………………………………………… 34
8設計小結 …………………………………………………………… 35
9致謝 ………………………………………………………………… 36
10參考文獻…………………………………………………………… 37



摘 要

 現代工業中，生產過程的機械化，自動化已成為突出的主題?；さ冗B續性生產過程的自動化已基本得到解決。但在機械工業中，加工、裝配等生產是不連續的。因此，裝卸、搬運等工序機械化的迫切性，工業機械手就是為實現這些工序的自動化而產生的。
機械手是模仿人的手部動作，按給定程序、軌跡和要求實現自動抓取、搬運和操作的自動裝置。它特別是在高溫、高壓、多粉塵、易燃、易爆、放射性等惡劣環境中，以及笨重、單調、頻繁的操作中代替人作業，因此獲得日益廣泛的應用。機械手一般由執行機構、驅動系統、控制系統及檢測裝置三大部分組成，智        能機械手還具有感覺系統和智能系統。
這次研究設計的是專用機械手，主要附屬于自動機床或自動線上，用以解決機床上下料和工件送。這種機械手在國外稱為“Mechanical Hand”，它是為主機服務的，由主機驅動；除少數以外，工作程序一般是固定的，因此是專用的。

關鍵詞： 機械手   結構設計   運動控制

Abstract
In the modern industry, the production process mechanization, the automation has become the prominent subject. Continuity production process and so on chemical industry automations were solved basically. But in the mechanical industry, productions and so on processing, assembly is not continual. Therefore, working procedure mechanization and so on loading and unloading, transporting urgency, the industry manipulator is for realizes these working procedure automation to produce.
Manipulator is based on the hand movements. According to the procedures, and requirements for automatic trajectory capture, handling and operation of the automatic devices. In particular, it is in high-temperature, high pressure, dust and more flammable, explosive, radioactive and other harsh environment. And the heavy, dull, the frequent operation substitute operations, It is increasingly widely used. Mechanical hands by executing agencies, driven systems, control systems and detection devices has three major components. Manipulator system is also feeling smart and intelligent systems.
This research design is the special-purpose manipulator, main attached in automatic engine bed or from generator in, with solves on the engine bed the yummy treats and the work piece delivers. This kind of manipulator in overseas is called “Mechanical Hand”, it is for the host service, actuates by the main engine; Besides minority, the working routine is generally fixed, therefore is special-purpose. 

Keywords：Manipulator   Structural Design    Motion Control