摘要
隨著信息領域各種技術的發展，在數據采集方面的技術也取得了長足的進步，采集數據的信息化是目前社會的發展主流方向。各種領域都用到了數據采集，在石油勘探、地震數據采集領域已經得到應用。
本課題提出一種基于單片機的無線溫度采集系統方案，該方案是利用單片機控制DS18B20溫度傳感器采集溫度、控制LED數碼管實時顯示溫度值、控制NFR240L1進行數據的無線傳輸，并由單片機去把溫度數據傳至計算機進行存儲。本系統中所用到的器件是STC 公司的STC89C52 單片機、數字溫度傳感器DS18B20和無線芯片NFR24L01，測量結果用七段段LED數碼管顯示采集的數字信息，并利用單片機串行口，通過RS-232 總線及通信協議將采集的數據傳送到PC 機，進行進一步的存檔、處理，并對測量結果進行顯示和存儲。

關鍵詞 單片機；溫度采集；NFR24L01；數據傳輸；串口通信；

Abstract
With the development of various technologies of information in the field,in data collection techniques have also made great progress,collect data,information and social development is the mainstream. Various areas of data collection used in oil exploration, seismic data acquisition in the field has been applied.
This issue presents a collection based on single chip system solutions for wireless temperature, the program is the use of microcomputer control the temperature DS18B20 temperature sensor acquisition, real-time control of LED digital display temperature control, control NFR240L1 wireless data transmissionby the microcontroller to the temperature data transmitted to the computer for storage. This system is a device used in the STC's STC89C52 microcontroller, digital temperature sensor DS18B20 and wireless chips NFR24L01, measured with a seven-segment LED digital display segment of digital information collectionand use Serial port, RS-232 bus and through the communication protocol to collect data to the PC, for further archiving, processing, and measurement resultsare displayed and stored.
Keywords SCM Temperature collection NFR24L01 Data transmission Serial communication

目 錄
1 緒論 1
1.1 課題背景 1
1.2 數據采集系統簡單介紹 1
2 溫度采集系統的設計 3
2.1 系統硬件電路構成 3
2.1.1 單片機部分 3
2.1.2 溫度傳感器部分 7
2.1.3 LED數碼管部分 15
2.1.4 NRF24L01無線數據傳輸部分 16
2.2 系統軟件設計 29
2.2.1 DS18B20 程序的設計 29
2.2.2 數碼管顯示程序的設計 31
3 串口通信 36
3.1 通信簡介 36
3.2 單片機串口通信接口 37
3.2.1 單片機串口結構 37
3.2.2 單片機與PC 機之間電平轉換硬件接口 38
3.2.3 單片機串口通信設置及程序設計 40
4 上位機程序設計 43
4.1 Visual Basic 語言簡介 43
4.2 串口通信的實現 43
4.2.1 MSComm 控件的操控原則 44
4.2.2 MSComm 的屬性 44
4.3 上位機程序設計 45
4.4 數據庫設計 47
總結 49
致謝 50
參考文獻 51
附錄 52
附錄1 52
附錄2 57
附錄3 80