目錄
摘要…………………………………………………………………………………2
第一章 前言…………………………………………………………………………4
第二章 循環流化床鍋爐動態特性分析……………………………………………4
第三章 循環流化床鍋爐自動控制系統……………………………………………4
3.1 給煤量控制系統……………………………………………………………4
3.2 一次風壓控制系統…………………………………………………………5
3.3 床溫控制系統………………………………………………………………5
3.4 二次風控制系統……………………………………………………………5
3.5 引風控制系統 ……………………………………………………………5
第四章 大型循環流化床機組的聯動控制分析……………………………………5
4.1二臺循環流化床鍋爐、一臺汽輪機的聯動控制…………………………5
4.2 抽汽工況下的聯動控制……………………………………………………6
第五章 125MW循環流化床熱水鍋爐主要熱工測點布設分析………………………6
5.1溫度測點布置………………………………………………………………6
　  5.2壓力測點布置………………………………………………………………6
5.3流量測點布置………………………………………………………………7
　  5.4其它測點……………………………………………………………………7
謝辭……………………………………………………………………………………8
參考文獻………………………………………………………………………………8

摘要
循環流化床鍋爐因其燃燒適應性廣，負荷調節性強以及環保性能優良而越來越受到重視。大量循環流化床鍋爐的裝備對于優化我國電力結構，改善電力供應品質提高我國整體資源利用效率以及降低污染物排放方面有重要作用。本文根據筆者多年火電工程施工實踐，詳細分析介紹了循環流化床鍋爐動態特性及自動控制系統組成，并結合工程實例，對125MW循環流化床鍋爐機組聯動控制設計與安裝調試技術要點進行了詳細闡述，對其熱工參數測點布設及DCS控制作了簡要介紹。
　　
關鍵詞：大型火電廠；循環流化床鍋爐；聯動控制；熱工參數測點；DCS控制
　　
        
Abstract

The circulating fluidized bed boiler because its burning wide adaptability, load and excellent performance of regulatory strong environmental more and more attention to. Lots of circulating fluidized bed boiler in the equipment for optimizing the structure of electric power, improve the power supply quality improve our overall efficiency of using resources and reduce pollutants has an important role. Based on the construction practice during many thermal power engineering, introduced a detailed analysis of the dynamic characteristics of circulating fluidized bed boiler and automatic control system composition, and combined with practical engineering, the circulating fluidized bed boiler unit linkage 125MW control design and installation commissioning technical points are expatiated on its thermodynamic parameters, sensors and DCS control are briefly introduced.
Keywords: large coal-fired plants; The circulating fluidized bed boiler; Linkage control; Thermal parameter point; DCS control