米粉混合機設計


包括論文，整套cad圖紙，答辯ppt


摘要：粗糧細吃，吃的是健康，吃的是時尚。食品權威人事一致認為，雜糧米粉、雜糧面條、雜糧粉絲產業將是21世紀最具有發展前途的朝陽產業，是最值得投資的項目。老百姓對綠色雜糧食品需求以每年30%的速度遞增，生產利潤豐厚。目前，米粉已在長江流域及南方省份普及，并逐漸向北方發展，終將風靡全國。據《南昌日?qǐng)?bào)》報道：南昌市平均每日米粉消耗量高達350噸。每公斤大米可生產鮮米粉1.8～2.8公斤，而其加工費僅為幾分錢，利潤豐厚，市場巨大。用該米粉混合機生產綠色雜糧食品，投資小（幾千元就可上馬），見效快（購機回家，產品即可上市），利潤大且場需求巨大，經營方式靈活多樣。

關鍵詞：米粉；發展；利潤豐厚
 
Parts of rice flour mixer design
Abstract:Fine-coarse grains to eat, eat healthy and eat fashion. Food authority personnel agreed that the grains of rice flour, noodles, cereals, grains industry will be the fans 21 of the most promising sunrise industry, is the most worthy of investment projects. Public demand for green food grains to the annual rate of 30 percent, production profitable. At present, the rice in the Yangtze River Basin and the southern provinces of universal and progressive development of the North will eventually sweep the country. According to "Nanchang Daily" reported: Nanchang average daily consumption of up to 350 tons of rice. Of rice per kilogram of fresh produce 1.8 to 2.8 kilograms of rice flour, and only a few of its fees and reaped huge profits, enormous market. Mixer with the rice grains of green food production, investment in small (a few thousand dollars could be launched), quick (home purchase, the product can be listed), profit and market demand for large, flexible mode of operation.

Key words:rice; development; lucrative
 
目錄
1 緒論 1
2 電動機的設計 2
2.1 電動機類型的選擇： 2
2.2 電動機功率選擇 2
2.3 確定電動機轉速 3
2.4 確定電動機的型號 3
3 皮帶的設計 3
3.1 計算功率 4
3.2 選取普通V帶型號 4
3.3 確定帶輪基準直徑D1、D2 4
4 皮帶帶輪設計 7
4.1 小V帶帶輪設計 7
4.2 大V帶帶輪設計 8
5 軸的設計 9
5.1 軸的類型 10
5.2 軸的材料 10
5.3 求輸出軸上的功率P2，轉速N2和轉矩T 10
5.4 初步確定軸的最小直徑 10
5.5 軸的結構設計 11
  5.5.1擬定軸上零件的裝配方案 11
  5.5.2根據軸向定位的要求確定軸的各段直徑和長度 11
  5.5.3確定軸上的倒角尺寸 12
5.6 精確校核軸的疲勞強度 12
6 軸承的設計 12
6.1 滾動軸承的當量動負荷 13
6.2 滾動軸承疲勞壽命的計算 13
7 鍵聯結的設計 14
8 箱體的設計 16
9 總結 16
參考文獻 18
致謝 19