摘要:
本畢業設計為某公司鋼結構廠房，實驗室是采用門式剛架結構的單跨廠房，檐口高度6.9m、跨度24m、柱距7.5，建筑面積為 2880㎡。門式剛架結構具有有效利用材料 ，構件尺寸小 、重量輕 ，而且可以在工廠批量生產 ，保證質量 ，工地連接簡便迅速 ，施工周期短的優點。由于門式剛架輕鋼結構具有許多其他結構所不具備的優點 ，其優越性和經濟效益是不言而喻的，廣泛地應用在一般工業與民用建筑中 。因而我選擇了此種結構作為廠房的結構。
設計包括建筑設計、結構設計、施工組織設計、制圖、編寫計算書。其主體是結構設計，對門式剛架的選型，選型后的截面驗算、位移驗算、節點設計，通過驗算來檢驗選型是否準確，其次還設計了次結構，如檁條、墻梁、垂直支撐、雨篷，基礎等。建筑設計中由于廠房對彩光、交通等有特殊要求，在設計中得到了充分考慮。施工組織設計中，我們根據所設計的結構，編制橫道圖、網絡圖和施工組織方案，使施工得到最優化。
設計中運用到鋼結構知識、結構力學求解器、制圖工具AutoCAD、Word文檔編輯軟件、文獻檢索等知識。
關鍵詞：門式剛架 結構設計
abstract
This dissertation aims to design for a numerical control laboratory, which is a single span workshop with a structure of steel portal frames. It has a cornice 6.9 meters high, span 24 meters extent, space between the columniations 7.5 meters long, architecture area 2880square meters size. steel portal frames combines the advantages of efficient using of material, small in dimension, light in weigh, batch produced and guaranteed quality. At the same time the building sites can be jointed as a whole rapidly and simply, and the construction time is shortened. Because of these virtues that many other structures do not possess it is widely used in industrial and civil construction projects. Therefore I choose this steel portal frames as the structure of workshop in my dissertation.
This design includes architecture design, structure design, construction organization design, drawing and compiling calculation files. Tthe main body of it is still structure design, in other words, to select the right figure of steel portal frames, and then test whether the selected form is nicety through checking the section and displacement and the node design. In the next place we also design some subordinate structure, such as purline, wall girder, upright bolster, awning and foundations etc. In architecture design there are some special requests in daylighting and traffic for workshop. All these have been considered with deliberation. In construction organization design, we work out the Gunter and network chart and construction organization scheme to optimization the construction based on our designed structure.
This design uses the knowledge of steel structure , structural mechanics, tracer, AutoCAD, Word and literature searches.
Key words: steel portal frames, structure design