畢業設計 基于AT89S52單片機信號發生器的設計

基于AT89S52單片機信號發生器的設計

摘要

采用直接頻率信號合成器(DDS)與單片機(MCU)相結合的方法,介紹ADI 公司出品的AD9850 芯片,給出芯片的引腳圖和功能。并以單片機AT89S52為控制核心設計了一個串行控制方式的正弦信號發生器的可行性方案,給出了單片機AT89S52與AD9850連接電路圖和調試通過的源程序以供參考。該電路設計方案正確可行,頻率容易控制,操作簡單靈活,且具有廣闊的應用前景。詳細介紹了DDS基本原理、系統方案構成、硬件電路設計和軟件設計。通過嚴格的實測數據分析表明該設計是可運行的。

關鍵詞: AT89S52  AD9850  直接頻率合成技術 信號發生器

Abstract

The way is used which combines the Direct Digital Synthesizer(DDS) and Main Computati0nal Unit(MCU) to design afunction signalgenerator.AD9850 which is produced by ADI Company is int roduced ,then the pins diagram and function are given. And the  control of a serial control sinusoidal signal generator by the core of single chip AT89S52 is designed ,at the same time ,the circuit connect diagram between AD9850 and AT89S52 ,and feasibility of the program for reference are proposed. This circuit design project is correct and feasible, it is easy to control the frequency, simple and flexible to work, it also has broad application  prospect’s . The principle and system components of DDS is introduced. It also introduces the methods which design the hardware circuit and software .It shows a success design by the data which come from the strict experiments.
Keywords  : AT89S52 ,AD9850 ,DDS ,signal generator
          

目錄
摘要 I
Abstract II
目錄 III
前言 1
1 DDS概述 3
1.1 DDS結構 3
1.1.1 頻率預置與調節電路 4
1.1.2累加器 4
1.1.3 控制相位的加法器 5
1.1.4 控制波形的加法器 5
1.1.5 波形存儲器 5
1.1.6 D/A轉換器 6
1.1.7 低通濾波器 6
1.2 DDS數學原理 6
2  總體設計方案 9
2．1系統設計原理 9
2．2總體設計框圖 9
3 系統硬件模塊的組成 10
3.1 鍵盤控制模塊 10
3.2單片機控制模塊 10
3.2.1 AT89S52主要性能 10
3.2.1.1 AT89S52功能特性描述 11
3.2.1.2 AT89S52的存儲器結構 14
3.2.1.3 定時器 14
3.2.1.4中斷 16
3.2.3 時鐘電路 17
3.2.4復位電路 18
3.3 LCD顯示模塊 18
3.3.1 LCD1602的主要性能 18
3.3.2 LCD1602與單機的連接 20
3.4 AD9850 與單片機連接模塊 20
3.4.1 AD9850簡介 20
3．4.3單片機與AD9850的連接 25
3.5.濾波電路設計 26
4 軟件設計與調試 28
4．1 程序流程圖 28
5 硬件電路制作 32
5.1 電路實現的基本步驟 32
5.2 原理圖的繪制 32
結論 34
謝  辭 35
參考文獻 36
附  錄 37