車輛限重系統電路設計.doc
車輛限重系統電路設計,目 錄摘要2關鍵字2引言21 概 述32 車輛限重系統硬件電路的設計32.1電阻應變式傳感器42.2 稱重傳感放大電路52.3 稱重傳感電路的安裝52.4加法運算放大電路62.5 adc0804模/數轉換器62.6 8051單片機82.7 驅動電路92.8 gps模塊簡介102.9 車輛限重系統中電源的設計112.10...


內容介紹
此文檔由會員 lixiaolei0512 發布目 錄
摘要 2
關鍵字 2
引言 2
1 概 述 3
2 車輛限重系統硬件電路的設計 3
2.1電阻應變式傳感器 4
2.2 稱重傳感放大電路 5
2.3 稱重傳感電路的安裝 5
2.4加法運算放大電路 6
2.5 ADC0804模/數轉換器 6
2.6 8051單片機 8
2.7 驅動電路 9
2.8 GPS模塊簡介 10
2.9 車輛限重系統中電源的設計 11
2.10 車輛限重系統的總設計電路圖 11
3 車輛限重系統的電路隱埋 13
4 車輛限重系統軟件的設計 14
4.1車輛限重系統軟件設計流程圖 14
4.2軟件設計的分析 16
4.3車輛限重系統的程序 16
5 小 結 18
致謝 18
參考文獻 18
英文摘要 21
車輛限重系統電路設計
摘要:由于現在車輛超重現象嚴重,車輛限重系統的設計意義較為重大。本設計在現有普通車輛的基礎上,安裝了電阻應變式傳感器,利用電阻敏感元件組成的惠斯登平衡電橋以及其電路輸出電壓與重量成線性關系的原理來稱重,隱埋了稱重傳感放大電路、A/D轉換器ADC0804、Mcs-51系列8051單片機、加法器以及DC-DC電源等。當車輛超重時,通過單片機的預置程序,使驅動電路工作,讓控制車輛油路和控制車輛電路的繼電器動作,對超重車輛進行管制,達到限制其啟動的目的。此時一并發送超重信號給GPS,GPS與交通部門通訊,GPS定位超重車輛,交通部門用GPS向單片機反饋不同的信號,來決定對超重車輛的處理。當車輛不超重時,單片機程序判斷后,使驅動電路不工作,不限制車輛的啟動。
關鍵字:稱重傳感器;單片機;電路隱埋
Design of the Heavy System of the Vehicle Limit
Abstract: As the phenomenon overweight of vehicle is serious now, the design significant of the heavy system of the vehicle limit is comparatively great. The design of the existing vehicles on the basis of the installation of the resistance strain sensor, use of sensor resistance of the Wheatstone bridge and balance their circuit output voltage and the linear relationship between the weight of the principle to weight. Implicit buried weighing sensor amplifier, A/D converter ADC0804, Mcs-51 series 8051 MCU , adder and DC-DC power supply and so on.. When the vehicle is overweight, with procedure of presetting of MCU, it urge the circuit work to make, it control vehicle oil passage and control relay movement , vehicle of circuit to let , control the vehicle overweight, achieve the goal of limiting its start. At this time MCU send the signals overweight to GPS , GPS makes communication with the traffic department , the vehicle overweight of GPS's positioning in the lump at this moment , the traffic department feedbacks different signals to the MCU with GPS, to determine the treatment to vehicle overweight. When the vehicle is not overweight , drive circuit does not work, restrictions on the launch vehicle , after procedure judges the MCU.
Keywords: Weighing sensor; MCU system ; Circuit buried