無功補償論文



摘 要 
 本課題研究以低壓電網無功補償改造為背景，研制了一種低壓無功功率補償控制器。作為一種非實時的無功補償裝置，該裝置以定時的電網監測數據為依據，以城鎮低壓網(220V)的無功補償為對象。本文主要研究了無功補償對電網性能的改善，以及控制器的軟硬件的配置。
 系統采用 單片機，該單片機是美國ATMEL公司生產的低電壓，高性能的CMOS 8位單片機，具有運算速度高，實時性好的特點；軟件則使用匯編語言進行編譯；人機操作界面采用LCD顯示,顯示效果較好；A/D轉換采用 ，是一款比較實用的A/D轉換裝置。該裝置可跟蹤電網無功功率的變化并自動補償,實現了無功補償裝置的優化運行,具有體積小、原理簡單、智能投切等優點。

關鍵詞：無功補償,單片機,低電壓

Abstract

 What this article studies is based on the alteration of reactive power compensation of low voltage, then design an equipment for reactive power compensation of low voltage. As a kind of reactive power compensation, this equipment is basis on the electrical network monitor data ,and provides reactive power for city’s low voltage power grids. This thesis has discussed the importance of the reactive power compensation for the power grids ,and introduded the hardware and software of the controller.
 This device's hardware core is AT89C51 SCM , which has many merits such as high operating speed. This monolithic integrated circuit is the low voltage which American ATMEL Corporation produces, a high performance CMOS 8 monolithic integrated circuits;The software uses the assembly language to carry on the translation;The man-machine operation contact surface uses the LCD demonstration, the demonstration effect is quite good; A/D transformation uses ADC0809 , it is a section of quite practical A/D switching device. This equipment may track the electrical network reactive power the change and the automatic compensation, and this installment has the volume to be small, the precision is high, the price compared to the higher merit.

Key Words:  reactive power compensation, SCM(Single Chip Micyoco),low voltage

 
目錄

摘 要 I
ABSTRACT I
目錄 II
第一章 緒論 - 1 -
1．1研究背景 - 1 -
1．2無功補償裝置的發展?fàn)顩r - 2 -
1．3 本課題主要研究的內容 - 4 -
第二章 無功補償?shù)脑?nbsp;- 6 -
2．1 無功補償?shù)脑?nbsp;- 7 -
2．2 低壓電網中的幾種無功補償?shù)姆绞?nbsp;- 9 -
2．3確定補償容量的幾種方法 - 10 -
2．4 本章小結 - 12 -
第三章 硬件設計 - 13 -
3．1 無功補償裝置的技術要求 - 13 -
3．2硬件介紹 - 14 -
3．3模擬信號調理電路 - 22 -
3．4 輸出控制電路 - 25 -
3．5 本章小結 - 26 -
第四章  軟件設計 - 27 -
4．1 投切原則 - 27 -
4．2功率因數計算 - 28 -
4．3 本章小結 - 30 -
第五章 總結與展望 - 31 -
致謝 - 32 -
參考文獻： - 33 -