基于WinCE系統的多路溫度采集系統

摘 要

溫度測量與控制技術在工業、農業、國防等行業有著廣泛的應用。ARM是RISC架構的低功耗、低成本、高性能的32位微處理器。Windows CE作為一個32位、多線程、多任務的操作系統，可以與ARM完美的結合。本文討論研究了一個基于ARM和Windows CE的嵌入式多路溫度采集系統，實現了多路溫度的實時采集及圖形顯示等功能。
 本文的主要研究內容如下：
 首先，深入分析和研究了嵌入式多路溫度采集系統的架構，具體分析了嵌入式操作系統Windows CE的特點，提出了采用Windows CE作為整個嵌入式系統的控制平臺，并具體研究了如何定制適合本系統的Windows CE操作系統。
 其次，本文還對嵌入式系統軟件的開發進行了深入研究，包括軟件的設計思想、軟件的功能模塊結構等等，得出了本系統的軟件所必須包含的各個功能模塊，并根據劃分的模塊具體闡述了本系統應用軟件的開發過程。
 最后，對基于Windows CE流接口驅動程序的實現進行了深入的分析和研究，本文研究開發了系統中AD/DA等非標準設備的驅動程序。

關鍵詞：嵌入式；Windows CE；ARM；多路溫度采集系統；驅動

Abstract

 The measuring and control technology of temperature have a widespread application in industry, agriculture, national defense and so on. ARM is a low power, low cost and high performance 32 bit Microprocessor with RISC architecture. And Windows CE, as a 32 bit, multi-thread, multi-task operating system, is able to work with ARM perfectly. An ARM and Windows CE based embedded multi-way temperature gathering system was studied in this paper, And multi-way temperature real-time gathering, graphical display and other functions was implemented in it.
 In this thesis, the main research contents include:
 Firstly, the architecture of the embedded multi-way temperature gathering system was analyzed and researched deeply, the embedded operating system Windows CE’s characteristics was analyzed in detail. And Windows CE was proposed to be the main control platform and an embedded Windows CE system that suits the application was constructed.
 Secondly, the development of embedded system software was analyzed, including the design idea of software and structure of functional modules, A conclusion that the system should have several important modules comes out and the software development process based on the actual module partition was discussed.
 Finally, the implementation of the non-standard equipments’ driver, such as AD/DA, was studied. There is a deeply analysis on implementations of Windows CE based stream interface drivers.

Key words:  Embedded;  Windows CE;  ARM;   Multi-way Temperature Gathering System;  Driver
目 錄

1  緒論 1
1.1  研究背景及意義 1
1.2  研究內容及目標 1
1.3  論文內容安排 1
2  多路溫度采集系統硬件介紹 2
2.1  嵌入式系統概述 2
2.1.1  嵌入式系統技術特點 2
2.1.2  嵌入式系統結構框架 3
2.1.3  嵌入式系統的應用 3
2.1.4  嵌入式產品開發流程 3
2.2  系統硬件平臺 4
2.2.1  系統硬件構成 4
2.2.2  S3C2410介紹 5
2.2.3  AD/DA電路介紹 6
3  多路溫度采集系統軟件環境設計 8
3.1  Windows CE操作系統定制 8
3.1.1  Windows CE操作系統的特點 8
3.1.2  Microsoft Platform Builder介紹 9
3.1.3  Windows CE操作系統的定制過程 10
3.2  Bootloader的移植 11
3.2.1  Bootloader的主要任務與典型結構框架 11
3.2.2  VIVI移植 12
4  多路溫度采集系統軟件設計 14
4.1  軟件開發環境介紹 14
4.1.1  Embedded Visual C++ 開發環境 14
4.1.2  C++面向?qū)ο笈cMFC 14
4.2  軟件設計思想與軟件結構 17
4.3  軟件主要模塊的分析與設計 18
4.3.1  主控程序 18
4.3.2  配置程序 20
4.3.3  驅動程序 20
4.4 系統運行效果 27
5  結束語 29
參考文獻 30
致 謝 31