摘 要
近年來隨著科技的飛速發展，單片機的應用正在不斷深入，同時帶動傳統控制檢測技術日益更新。在實時檢測和自動控制的單片機應用系統中，單片機往往作為一個核心部件來使用，僅單片機方面知識是不夠的，還應根據具體硬件結構軟硬件結合，加以完善。
交通信號燈控制方式很多。本系統采用以單片機AT89S52為中心器件來設計交通燈控制器，實現了通過AT89S52芯片的P1口設置紅、綠燈燃亮?xí)r間的功能；紅綠燈循環點亮，倒計時剩5秒時黃燈點亮警示（交通燈信號通過P1口輸出，顯示時間直接通過AT89S52的P0口輸出至雙位數碼管）；時間倒計時可通過雙位數碼管顯示。本系統實用性強、操作簡單、擴展功能強。
本文設計了一種基于MCS-51單片機的交通燈控制系統。系統主要包括硬件電路和軟件程序。在比較論證的基礎上，設計了滿足設計要求的電路，并編寫相應的軟件程序。系統構造簡單，通過定時系統可以實現對時間的設定，由狀態控制系統來設定交通燈的狀態。在此基礎上，使用LED數碼管對計數系統進行譯碼顯示，使每一通道上不僅能夠顯示交通燈的狀態，還能提醒行人剩余時間，給行人和車輛的通行提供了很大的方便。應用單片機AT89S52來完成整個系統的控制，采用C語言設計軟件。系統具有較強功能，體積小，成本低，有一定的實際應用價值。


關鍵詞：?jiǎn)纹瑱C(jī) 交通燈 調試
ABSTRACT
With the rapid development of science and technology in recent years, SCM applications are deepening at the same time promote the growing of traditional control detection technology updates. In real-time detection and automatic control of the microcomputer application system, the microcontroller is often used as a core component, only the microcontroller is not enough knowledge, but also based on specific hardware structure of hardware and software combination to be improved.
Traffic signal control many ways. The system uses MSC-51 Series Microcontroller AT89C51-centric devices to design traffic signal controllers and achieved through the P1 port AT89C51 chip set of red, green, gave the time of the function; traffic light cycle of light, the countdown 5 seconds left when the yellow lamp lit warning (traffic light signals through the P1 port output, display time directly through the P0 port output AT89C51 to double-digit nixie tube); Time countdown can be a double-digit LED display. The system practical, simple, extending strong function.
In this paper it has designed one kind of traffic light control system based on the MCS-51 monolithic integrated circuit. The system mainly includes the hardware circuit and the software routine. On the basis of comparison,we designed a circuit according to the design requirement,and compiled the corresponding software routine.The system structure is simple, it may realize the time hypothesis by the timing system, establishe traffic light's condition by the state control system. Based on this, we uses the LED digital tube to decode the counting system, so that each channel can not only show the status of traffic lights, but also to remind pedestrians time remaining, and provide a great convenience to vehicles and pedestrians. Applying the Monolithic integrated circuit AT89C51 to accomplish the control of the entire systematic , using C language design software. The system has the strong function, the volume is small, the cost is low, has certain practical application value.

Key words: SCM Traffic light Debug
目錄
第一章 緒論 1
1.1 選題目的 1
1.2 選題背景及意義 1
1.3 交通信號燈 1
1.4 交通燈的發展史 2
第二章 系統總體設計 3
2.1 系統總體設計方案 3
2.2 系統設計框圖及主要思想 4
2.2.1 系統硬件設計框圖 4
2.2.2 系統設計思想 4
第三章 硬件電路設計 7
3.1 總體設計及功能描述 7
3.2 單片機簡介 7
3.2.1 單片機概述 7
3.2.2 單片機發展歷史 8
3.2.3 單片機發展趨勢 8
3.2.4 單片機的特點 9
3.2.5 單片機的應用領域 10
3.3 單片機AT89S52簡介 10
3.3.1 AT89S52功能特性描述 10
3.3.2 AT89S52功能引腳說明 11
3.4 單片機最小系統 13
3.5 信號燈控制電路 14
3.5.1 信號燈控制電路圖 15
3.5.2 信號燈控制電路的設計原理 15
3.5.3 信號燈控制端口設計 15
3.6 數碼管控制電路 17
3.6.1 數碼管控制電路圖 17
3.6.2 數碼管控制電路設計原理 18
3.6.3 數碼管的簡介 18
第四章 PCB設計 21
4.1 PROTEL99SE軟件的介紹 21
4.2 交通燈原理圖 21
4.2.1 新建設計文檔 21
4.2.2 電路圖設計 21
4.3 電路板設計流程 22
4.4 印制板的繪制 22
第五章 系統軟件設計 25
5.1 匯編語言與C語言的比較 25
5.2 Keil C51uVision 集成開發環境 25
5.3 程序設計思路 26
5.4 交通燈設計程序 27
第六章 調試 33
6.1 硬件調試 33
6.2 在硬件調試中出現的問題 35
6.3 軟件調試 35
6.4 軟硬件聯調 35
第七章 結束語 37
致謝 39
參考文獻 41
附錄A：系統硬件電路圖 43
附錄B：PCB版圖 45
附錄C：系統實物圖 47