基于PLC控制系統的智能壓力容器氣密性測試裝置

摘    要

本課題主要是完成PLC控制系統的智能壓力容器氣密性測試裝置設計。本文首先對課題的背景和當前壓力容器的現狀進行了簡單的描述，緊接著提出了自己的設計方案。然后對自己的方案進行了一系列介紹，先從總體設計介紹開始，并給出了相關的設計框圖，隨后對部分關鍵的器件進行了具體描述；在軟件方面介紹了下位機中部分關鍵的程序，并體現了對問題解決的依據及思路；上位機部分，對上位機的組態及程序控制等做了簡單介紹。最后，在設計完成后對其做了簡單的調試及分析，結果證明軟件系統設計和硬件系統設計基本合理，能夠完成所預期的目的和所要求的功能。

關鍵字：氣密性測試臺；PLC控制系統；上位機;壓力傳感器

BASED ON PLC CONTROL SYSTEM OF INTELLLIGENT PRESURE VESSELTIGHTNESS TEST DEVICE

ABSTRACT
                                      
The topic mainly completes PLC control system for intelligent pressure tightness test equipment pressure vessel design. This article firstly brief descriptions the background of the subject and status of the current pressure vessel, then presents my own program. Then a series of descriptions about the subject are introduced, first starts with the whole design, and gives the relevant design diagram, and specifically introduces some of the key devices; In terms of software describes some of the key program about lower computer, and represents the thinking and basis for solving problems; About the PC, gives a brief introduction about Configuration and process control of the host computer. Finally, I do a simple debugging and analysis after the topic completed, the results prove that the software system design and hardware system design is reasonable, and the purpose and the required functions can be completed.

KEY WORDS: Air tightness test bench; PLC control system; host computer; pressure sensor