本文介紹了最大切斷直徑為14mm的臥式鋼筋切斷機的設計，內容包括電動機的選擇，傳動系統的設計以及校核。

摘要
根據電機的工作環境選擇電動機類型，采用臥式安裝，防護式電機，鼠籠式三相異步電動機。選擇三級減速，先是一級帶減速，再兩級齒輪減速。一級帶傳動，它具有緩沖、吸振、運行平穩、噪聲小、合過載保護等優點，并安裝張緊輪。兩級齒輪減速，齒輪傳動可用來傳遞空間任意兩軸間的運動和動力，并具有功率范圍大，傳動效率高，傳動比準確，使用壽命長，工作安全可靠等特點。動力由電動機輸出,通過減速系統傳動,把動力輸入到執行機構。由于傳動系統作 的是回轉運動,而鋼筋切斷機的執行機構需要的直線往復運動,為了實現這種轉換,可以采用曲柄滑塊機構,盤行凸輪移動滾子從動件機構,齒輪齒條機構。本課題采用曲柄滑塊機構作為本機械的執行機構 。

關鍵詞  切斷 建筑  鋼筋  齒輪  曲柄滑塊
Abstract
According to the working environment choice the type of electric motors, using horizontal installation, protection of the electrical, squirrel-cage three-phase asynchronous motor. Option three slowdown,
first level belt slowdown, followed by the secondary gear deceleration. First level with the introduction of automated, because it has a buffer, absorb shock and operate smoothly, small noise, and can protect the over loading. Then introduce a secondary gear deceleration slowdown, because gear transmission can be used to transmit arbitrary space between the two axis movement and momentum, and the scope of power, transmission efficient transmission accurately, long using life, such as safe and reliable character. Power output by electric motors through slow down transmission system to import power to the executive body. As the system make rotation movement, The steel cutting machine needs the back and forth straight line sport ,in order to achieve this transformation, we can use c slider-crank  institutions or gear and rack. I decided to consider realistic conditions using slider-crank as the executing machinery.

 Keywords  cutting   architectural    reinforcing steel dar   gear   slider-crank