摘 要
本課題是設計一個家用液壓電梯。主要思路是采用液壓動力驅動，結構采用二級背簍形式?；钊醉敳渴且粋€定滑輪結構，活塞缸頂起定滑輪帶動鋼絲繩，通過二級滑輪組實現受力和位移比例關系，從而實現利用較少的空間提升重物。完成背簍式家庭液壓電梯設計總體結構設計，即完成包括總體裝配設計、主要部件設計計算、非標零件設計；升降系統總體的受力分析及校核計算等。
針對以上功能提出液壓電梯結構，設計其結構特點和工作原理，并對其零部件進行參數計算和標準化。液壓傳動系統可靠，電梯運行平穩、舒適、安靜。除此之外還具有獨特的優越性和適用性：機房位置設置靈活、安全可靠性高、承載范圍廣泛，適應能力強、節省空間、降低成本、結構簡潔、故障率低、易于日常維護保養。
本設計是為低層建筑設計的室內小型液壓電梯，要求使用方便，有利老年人、殘障人上下樓。

關鍵詞：電梯 結構設計 液壓系統 滑輪組

Abstract
This subject was designed as a household hydraulic elevator. Main idea was created by hydraulic system. Structure was adopt two-level basket form. piston-cylinder is a fixed pulley at the top of the structure，the piston-cylinder drive pulley set from the top rope to raise heavy objects. Through the two-level belts and pulleys to make the power and distance expand. So that use less space to rise heavy substance. Complete including general assembly design, main components design calculation, non-standard parts design； The lifting system overall analysis of stress and check calculation.
Hydraulic lift for the proposed structure of the above features，design features and working principle of their structure and parameters of its components calculated and standardized. Hydraulic lift has the reliable hydraulic drive system，the quiet and smooth. Compared with traction type lift hydraulic lift has the following outstanding advantage：the flexible setting of the machine room position；the highest safe and reliable properties；the wide bearing range and the stronger adaptability；it saves the space，reduces energy consumption and cuts down the cost；hydraulic lift is of the concise structure，low trouble rate. It is easy for the daily maintenance.
This hydraulic elevator is designed for low-rise buildings of indoor small，it demand easy to use，and it can helps old people and some disable people to move.

Keywords: Elevator Structural Design Hydraulic System Hulleys


目 錄
摘 要 I
Abstract II
引 言 1
1. 概 述 2
1.1 項目要求 2
1.2 項目意義 2
1.3 國內外現狀 3
1.3.1 國內 3
1.3.2 國外 3
1.3.3 展望 5
1.4 液壓電梯的技術特點與控制類型 5
1.4.1 技術特點 5
1.4.2 控制類型 6
2. 設計方案論證 8
2.1 剪叉液壓電梯 8
2.1.1 結構特點 8
2.1.2 工作原理 8
2.2 直升式液壓電梯 9
2.2.1結構特點 9
2.2.2工作原理 9
2.3 背簍式液壓電梯 10
2.3.1結構特點 10
2.3.2工作原理 11
2.4 結論及選定方案 11
2.4.1 選定方案 12
2.4.2 電梯總體布局 12
3. 設計計算 14
3.1 布局解析 14
3.2 受力分析 15
3.2.1上升下降過程受力分析 15
3.3 滾輪軸的設計計算 30
3.3.1 滾輪軸的計算 30
3.3.2 滾輪軸的彎矩圖 31
3.4 定滑輪軸的計算、校核 31
3.4.1 定滑輪軸的計算 31
3.4.2 定滑輪軸的剪力彎矩圖 32
3.5 鋼絲繩直徑的選擇 32
4 液壓油路設計 34
結 論 37
致 謝 38
參考文獻 39
附 錄 40