摘要


隨著工業自動化發展的需要，機械手在工業應用中越來越重要。文章主要敘述了機械手的設計計算過程 。
首先，本文介紹機械手的作用，機械手的組成和分類，說明了自由度和機械手整體座標的形式。同時，本文給出了這臺機械手的主要性能規格參量。機械手采用液壓傳動，使傳動系統簡單可靠；選用可編程控制器對機械手的動作進行控制，使控制程序簡單，系統維護方便。設計過程中，對機械手和液壓缸部分做了詳細的設計計算。同時，對機械手的通用性主要是采用可更換式手部結構來實現，通過更換手部，可使機械手抓取外圓零件和內圓零件，從而實現了系統的多功能化。機械手總體結構能夠?qū)崿F(xiàn)手臂的水平伸縮、垂直升降、旋轉和抓取等功能，這些動作都是可編程控制器控制，用液壓缸驅動機械手來完成的。
文章中介紹了搬運機械手的設計理論與方法。全面詳盡的討論了搬運機械手的手部、腕部、手臂以及機身等主要部件的結構設計。
最后使用軟件對機械手PLC控制仿真。

關鍵詞：機械手；液壓傳動；液壓缸；PLC仿真；



















Abstract

The applying of the manipulators are more and more important in the industry, with the development of industrial automation. The paper mainly narrated the design and calculation of light and transfer manipulator.
The first，The paper introduces the function,composing and classification of the manipulator,tells out the free-degree and the form of coordinate.At the same time,the paper gives out the primary specification parameter of this manipulator. Manipulator use hydraulic drive so the transmission system can be simple and reliable. The manipulator and hydraulic cylinder are detailed introduction in this paper. The movements of mechanical hands are controlled by programmable controller which procedures are simple and the system maintenance can be convenient. And the universal ability of manipulator is based on the interchangeability of the hand’s structure. Manipulator can grasp cylindrical parts and inner parts through the replacement of hand so system is multifunctional. Manipulator overall structure achieves some functions of the level expands and contracts, the vertical fluctuation and captures the semifinished materials. All those movements are controlled by programmable controller and realized by hydraulic cylinders.
This article system elaboration industry manipulator's design theory and method. The comprehensive exhaustive discussion has transported manipulator's hand, the wrist, the arm ，the fuselage and so on ,which the major structural design computation.
Finally uses the software to carry out the PLC control simulation for manipulator's hand.

Keywords: manipulator; hydraulic power transmission；Hydraulic cylinder；Programmable logic Controller simulation;


目錄
1 緒論 1
1.1前言 1
1.2 工業機械手的簡史 1
1.3工業機械手在生產中的應用 3
1.4 機械手的組成 4
1.5工業機械手的發展趨勢 5
2 機械手的總體設計方案 7
2.1 機械手基本形式的選擇 7
2.2機械手的主要部件及運動 7
2.3驅動機構的選擇 8
2.4 機械手的技術參數列表 8
3 機械手手部的設計計算 9
3.1 手部設計基本要求 9
3.2 典型的手部結構 9
3.3機械手手抓的設計計算 9
3.4 機械手手抓夾持精度的分析計算 13
3.5彈簧的設計計算 14
4 腕部的設計計算 17
4.1 腕部設計的基本要求 17
4.2 腕部的結構以及選擇 17
4.3 腕部的設計計算 18
5 臂部的設計及有關計算 23
5.1 臂部設計的基本要求 23
5.2 手臂的典型機構以及結構的選擇 24
5.3 手臂直線運動的驅動力計算 24
5.4 液壓缸工作壓力和結構的確定 27
6 機身的設計計算 29
6.1 機身的整體設計 29

6.2 機身回轉機構的設計計算 30
6.3 機身升降機構的計算 34
6.4 軸承的選擇分析 37
7 液壓驅動系統設計 38
7.1液壓驅動的特點 38
7.2液壓系統設計 39
8 PLC控制系統設計 40
8.1 PLC的特點 40
8.2 PLC的選擇及I/O分配 40
8.3 PLC程序設計及仿真 42
結論 50
致謝 51
參考文獻 52
附錄 53