金屬切削性能的多參數檢測方法研究

金屬切削性能的多參數檢測方法研究

摘 要

針對我國發動機缸體用灰鑄件生產中的刀具磨損嚴重的問題，采用了復合孕育處理的方法來提高灰鑄件的加工性能。并成功地應用了萬能工具顯微鏡對加工經不同孕育處理的灰鑄件的鉆頭的后刀面磨損寬度予以測量，可達到對經不同孕育理灰鑄件的加工性能的精確評估。
由于長期以來，人們都對缸體用灰鑄件加工性能研究的重要性缺乏必要的認識，一直以來沒有引起研究者的足夠重視，因而到目前為止至今還沒有一種有效提高缸體用灰鑄件加工性能的有效方法和衡量灰鑄件加工性能好壞的準確方法，本論通過結合前人研究的基礎上，通過應用復合孕育的方法和使用萬能工具顯微鏡對加工鉆削圓盤后鉆頭后刀面磨損寬度的測量，以期從根本解決這些長期以來困擾我國缸體發展的科技難題。
本論文是改裝一機床來測量出鉆頭所受的扭矩。去掉刀架，在其上安裝一鉆頭，用絲扛、溜板箱來實現鉆頭的進給運動，用鉆頭鉆金屬工件，變頻電機來帶動鉆頭，電機提供給鉆頭不同的速度和通過可以上下移動的尾座來改變工件的上下位置來實現多自由度、多參數的測量出金屬的切削性能。在切削過程中鉆頭所受的扭矩可以通過粘貼在電機主軸上的傳感器來測量。

關鍵詞； 鑄體，切削性能，測試，扭矩，機床，變頻電機

 
 
METAL CUTTING PERFORMANCE OF
MULTI-PARAMETER DETECTION

ABSTRACT

The developing situation of the gray cast iron used in cylinder body is introduced. The performance of the domestic gray casts contrasts with the foreign ones. The questions existed in our cylinder product are put forwarded, particular to the machinery-ability of cylinder body. The wear of the flank face of the drill is measured by the universal tool microscope, which can accurately measure the wear of the drill.
As a result of a long time, people are used to block the processing properties of gray cast the importance of lack of necessary knowledge, no researchers have been of sufficient importance, which so far has yet to effectively enhance the body with a gray cast processing effective way of performance and measure the performance of mixed gray castings accurate processing methods, by combining the theory of the basis of previous studies, through the application of complex breeding methods and the use of universal tool microscope after disc of processing drilling drill flank wear width measurements, with a view to fundamentally solve these problems a long period of time block the development of China's science and technology problems.
This paper is a modification of a machine to measure the torque suffered a bit. Remove the tool, install one in his bit, carried by wire, slide the box to achieve drill feed motion, the workpiece metal drill bit, variable frequency drive motor to drill, drill motor to different speeds and can be up and down through the Tailstock movement up and down to change the location of the workpiece to achieve more freedom。
Bit in the cutting process can be subject to torque spindle motor attached to the sensor to measure. The equipment used in the slide of the machine tool boxes, carrying silk, rail, Tailstock, Spindle motor fixed frequency of the sensor.

KEY WORDS： casting, cutting performance, testing, torque, machine tools, vari
目　錄

第1章 緒 論 1
1.1灰鑄鐵切削性能研究的意義 1
1.2、國內外缸體生產的發展的現狀的趨勢 1
1.3現在我國生產的灰鑄件就加工性能而言與國外生產的灰鑄件主要存在以下方面的差異： 2
1.4金屬切削機床在國民經濟中的地位 2
1.5機床的發展概況和我國機床工業目前的水平 3
第2章 方案原理和扭矩的測量 5
2.1 扭矩的意義 7
2.2傳感器的選用 8
2.3 傳感器的類型 9
2.3.1應變型扭矩傳感器 9
2.3.2 壓電式傳感器 10
2.4電橋 12
2.4.1直流電橋 12
2.4.2交流電橋 13
2.5應變片的粘法 13
2.6 測力軸承 15
2.7相近實例 16
第3章 機床的整體設計 17
3.1車床類型 18
3.2車床的整體設計 20
3.2.1 床身的設計 20
3.2.2 導軌的選擇 20
3.2.3 直線運動機構的選擇 20
3.4 溜板箱 21
3.5  尾座部分 23
3.5.1 夾具體的具體設計 23
第4章 電機的選擇 27
4.1交流電動機的調速方式 27
4.1.1調壓調速 27
4.1.2電磁轉差離合器調速系統 27
4.1.3 繞線轉子異步電動機轉子回路串電阻調速 28
4.1.4 繞線轉子異步電動機串級調速 28
4.1.5 變頻調速 28
4.2 變頻器的構成 29
第5章 切削式樣材料的實驗內容和研究方法 31
5.1實驗內容 31
5.2 實驗方法 31
第6章 實驗結果和分析 33
6.1 單一孕育劑的孕育結果 33
6.1.1 單一孕育劑處理鑄件的分析 33
6.1.2 單一孕育劑處理灰鑄件加工性能結果和分析 33
6.1.3單一孕育劑處理灰鑄件的實驗結論 35
6.2 75FeSi+Sr復合孕育處理灰鑄件的結果和分析 35
6.2.1  75FeSi+Sr符合孕育劑灰鑄件力學性能對比 35
6.2.2  復合育劑處理灰鑄件的斷面敏感性對比 36
6.2.3  75FeSi+Sr復合育劑灰鑄件的加工性能對比 36
6.2.4  75FeSi+Sr復合育劑灰鑄件的顯微組織的分析和對比 37
6.2.5  75FeSi+Sr復合育劑灰鑄件的試驗結論 38
結　論 39
謝 辭 40
參考文獻 41
外文資料翻譯 42