摘 要
目前，海洋工程技術和裝備已被開發，海洋鉆井平臺作為海洋油氣資源開發的生產基地，配置可靠、安全的監控系統對鉆井平臺有著重要的意義。
本文以第六代半潛式鉆井海洋平臺為研究對象，根據平臺中設備配置情況以及自動化監控系統的要求，利用網絡、數據庫、軟件等技術設計了集成監控系統的網絡結構和系統功能，并實現了鉆井子系統的監控功能。該系統具有適應性廣、組合方便等特點。主要完成的工作有：
(1) 深入研究了半潛式鉆井平臺鉆井系統的結構；概括總結了海洋鉆井平臺中鉆井子系統，動力定位子系統，電力子系統，壓載子系統和緊急關斷子系統以及各子系統的設備配置；完成了海洋鉆井平臺集成監控的系統功能設計任務。
(2) 設計了分層網絡結構的集成監控網絡構架；研究了異構總線的集成方法，特別是采用了OPC技術。
(3) 詳細討論了鉆井子系統的主要監控參數；分析了部分監測參數，如大鉤負荷、大鉤高度、鉆壓、鉆頭位置、泵沖；研究了故障報警以及綜合判斷的故障信息，如利用大鉤負荷（懸重）、轉盤轉速、扭矩、立壓、排量和大鉤高度等參數的變化情況判斷是否卡鉆。
(4) 利用Visual Basic 6.0，iFIX組態軟件實現了鉆井子系統中監控界面模塊、數據庫模塊、實時報警模塊、實時曲線和歷史曲線顯示模塊、報表模塊和查詢模塊等功能。
最后，利用實驗室的局域網、模擬數據測試了鉆井子系統的監控功能。測試結果表明：設計完成的監控系統的可用性。

關鍵詞 半潛式鉆井平臺；集成監控系統；冗余；OPC；iFIX













Abstract
At present, marine engineering technology and equipment have been developed. Offshore drilling platform is the production base to exploit oil and gas resources under the sea. It is significant for drilling platform to be equipped with reliable and safe control system.
This paper takes the sixth generation semi-submersible drilling platform as the research object, based on the equipment configuration and automation control system requirements of the platform, making use of network, database, software and other technology to design the network structure and system functions of the integrated monitoring system, and the realization of the drilling system monitoring function. The system has the characteristics of the wide adaptability and convenient combination. The major work completed as follows:
(1) Studied the structure of the semi-submersible drilling platform drilling system; Summary of drilling system, dynamic positioning system, electric power system, the ballast system and emergency shutdown system in the offshore drilling platform and the device configuration of each subsystem. Completed the system function design task of integrated monitoring in marine drilling platform.
(2) Design the integrated monitoring network architecture of a hierarchical network structure; Study the integration method of the heterogeneous bus, especially using OPC technology.
(3) Discussed in detail the main control parameters of drilling system; Analysis of the monitoring parameters, such as the hook load, hook height, pressure of the drill, bit position, the pump stroke; Study the fault alarm and comprehensive judgment of fault information, such as the use of hook load, rotating speed, torque, vertical pressure, displacement and hook height and other parameters to determine whether the card drill.
(4) Using Visual Basic 6.0, iFIX configuration software to realize the monitoring interface module, database module, alarm module, real-time curve and the historical curve display module, report form module and query module function of the drilling system.
Finally, the use of laboratory LAN, simulation data to test the monitoring function of drilling system. The test results show that: the design of this control system availability.

Key words Semi submersible drilling platform; integrated monitoring system; redundancy; OPC; iFIX

目 錄
摘 要 I
Abstract III
第1章 緒 論 1
1.1研究背景 1
1.2 鉆井平臺的監控現狀 2
1.3 鉆井平臺監控系統發展趨勢 2
1.4 鉆井平臺的監控意義 2
1.5 主要研究?jī)?nèi)容與文章結構 3
1.5.1 主要研究?jī)?nèi)容 3
1.5.2 文章結構 4
第2章 海洋平臺集成監控系統設計 5
2.1 半潛式鉆井平臺概況 5
2.2 集成監控系統設計要求與功能 6
2.2.1 集成監控系統的特點 6
2.2.2 設計要求 7
2.2.3 系統功能 7
2.3 集成監控系統設計思路 11
2.3.1 硬件結構設計思路 11
2.3.2軟件結構設計思路 11
2.4 本章小結 13
第3章 海洋平臺集成監控系統網絡結構設計 14
3.1 現場設備層網絡結構設計 14
3.1.1 Profibus總線 14
3.1.2 CAN總線 15
3.1.3 海洋平臺中現場設備的總線 16
3.1.4 異構總線的集成 17
3.2 監控管理層網絡結構設計 18
3.2.1 環形網絡 18
3.2.2 星型網絡 19
3.2.3 工業以太網 20
3.2.4 監控管理層網絡結構 21
3.3 OPC技術及其應用 22
3.3.1 OPC技術 22
3.3.2 OPC在監控系統中的應用 24
3.4 本章小結 25
第4章 主要監控子系統的分析與設計 26
4.1 鉆井子系統 26
4.1.1 鉆井子系統概況 26
4.1.2 鉆井子系統設備配置 26
4.1.3 主要監控參數分析 28
4.1.4鉆井子系統報警信息與綜合故障分析 34
4.1.5 鉆井監控系統設計 35
4.2 動力定位子系統 36
4.2.1 動力定位子系統概況 36
4.2.2 動力定位子系統設備配置 37
4.2.3 主要監控參數 38
4.3 電力子系統 40
4.3.1 電力子系統概..