有設計前期所有資料開題報告，審查表，外文翻譯，任務書，設計說明書及所有圖紙

目錄

1 引言 1
1.1 畢業設計的目的及要求 1
1.1.1  畢業設計的目的 1
1.1.2  畢業設計的內容和要求 1
1.2  本行業現狀 1
1.3  CCD技術簡介 2
2  總體方案設計 3
3  系統構成 4
4  煙葉脫梗效果檢測系統的工作原理 5
5  機械攤薄裝置 6
5.1  工作原理 6
5.2  物料輸送原理 7
5.3  物料運動狀態的選擇 8
5.4   機械指數K及振動次數n和振幅A1的選擇 9
5.5  振動方向角Ψ的選擇 9
5.6  槽體工作面傾角α的選擇 9
5.7  彈簧安裝角β 10
5.8  料槽材料 10
5.9  料槽尺寸及重量 10
5.10 主振彈簧剛度K的確定 10
5.11 彈簧截面尺寸及彈簧最小截面的確定 10
5.12 阻尼比b及相位差角ε 11
5.13電磁激振力和激振力幅值F’ 11
5.14電磁鐵設計 12
5.14.1 電磁鐵安裝方式 12
5.14.2  電磁鐵參數確定 13
5.14.3  電磁鐵的頻率和電壓 13
5.14.4  鐵心截面積ST 13
5.14.5  電磁鐵安裝氣隙及平均工作氣隙 14
5.14.6  線圈匝數 15
5.14.7  導線直徑 15
5.15  電磁振動攤薄裝置工作效率分析 15
5.15.1  激振間隙對輸送率的影響 15
5.15.2  槽體傾角對生產率的影響 16
5.15.3  驅動電壓對生產率的影響 17
5.16 電磁鐵驅動電路選擇 17
5.17  接料裝置設計 18
5.17.1 擋板尺寸﹑材料的確定 19
5.17.2 軸及其軸承的選擇 19
5.17.3 步進電機的選擇 19
6  圖像采集系統設計 20
6.1  光源 20
6.2  CCD圖象傳感器的選取 20
6.3  照度匹配 22
6.4  分辨率的計算 23
6.5  光學鏡頭設計 23
6.6  相對孔徑 24
6.7  驅動器時序設計 26
6.8  二值化處理 28
6.9  數據采集過程分析 29
7  單片機系統設計 30
7.1  單片機中央處理單元CPU的選擇 30
7.2  AT89C51的時鐘電路 34
7.3  程序存儲器擴展 34
7.4  地址鎖存器74LS373 35
7.5  數據存儲器擴展 35
7.6  8155擴展 35
7.7  顯示電路 36
8  圖像處理方法 37
9  程序設計 38
9.1  程序框圖 38
9.2  部分程序指令 40
10 影響測量精度的因素分析 42
結束語 ……………………………………………………………………………………43
致  謝 ……………………………………………………………………………………44
參 考 文 獻  ……………………………………………………………………………45

畢業設計說明書（論文）中文摘要

在對CCD(電荷耦合器件)技術進行深入研究的基礎上，設計了一種可行的煙葉脫梗效果檢測系統，它主要由煙葉攤薄部分、光源、驅動電源、圖像采集、二值化處理、單片機系統以及顯示輸出7部分組成,其工作原理是:先利用振動攤薄裝置對煙葉進行單層化分離處理,然后對整體面積進行掃描,將圖像數據進行存儲處理,最終通過單片機計算顯示出不同面積段煙葉的比例.本文介紹了該系統的工作原理、電磁振動輸送機攤薄機構的設計、CCD器件的選取、光源及驅動電源設計、單片機系統的擴展、圖像數據處理方法,程序框圖的設計等.重點是對新的圖像數據處理方法的提出,并對方案進行了可行性論證,特別是利用單片機統計計算出數字圖像的面積,方法新穎簡潔,性?xún)r(jià)比高,實用性強。

關鍵詞   CCD 煙葉脫梗效果檢測 電磁振動輸送機 單片機 圖像數據處理
 
畢業設計說明書（論文）外文摘要

Title  The design of checking system for the effect that the leaf of the tobacco escapes from the stem         
Abstract
In the basis of carrying out the depth of studying on the CCD (charge-coupled device) technology, and design one kind of feasible testing system for the effect that the leaf of the tobacco takes off the stem .it mainly by the part of spreading out the leaf of the tobacco thin, light source, power-driven, image acquisition, Binary processing, microprocessor systems and show that the output is composed of seven parts, Its principle : Firstly, carrying out the handling of monolayer that to split the tobacco using the vibration conveyor of spreading out the leaf of the tobacco thin ,as then , carries out scanning for whole area , and image data should be proceed storage process, eventually calculate and show the proportion of different area section of the tobacco through Single chip Microcomputer .the paper introduces the principle of the work, the design of the electromagnetic vibration conveyor diluted, the selection of CCD device, a light source and power supply design, SCM expansion of the system, the methods of handling image data processing, procedures diagram of the design. Focal point is putting forward for the new image data processing technique,as well as plans for the feasibility study, in particular, the novel method that using of SCM statistics calculated digital images of the area is originality and simple, the cost-effective is high ,and the pragmatism is strong.

Key Words  CCD  Checking for the effect that the leaf of the tobacco escapes from the stem  the electromagnetic vibration conveyor  Single chip Microcomputer  the handling of image data