摘 要

本設計是利用單片機遙控系統來實現對電動機的控制。詳細論述了本次設計的單片機控制系統的總體方案，硬件設計，軟件的設計以及可靠性分析等。本系統所用的主要部件是單片機89C52，F(xiàn)SK發射芯片nRF401等許多器件。該系統具有自動化程度高，成本低，體積小，控制精確等優點, 大大提高了產品生產率，有很好的經濟效益和廣闊的發展前景。
關鍵詞：單片機；遙控；接收；電機控制

ABSTRACT
This design make use of the single slice the machine to control from a distance the system to realize to control electric motor. Detailed treatise single slice this design for total project for machine controlling the system, hardware design, software and dependable analysis etc. The main parts for using of this system is a machine of single slice 89 C51s, FSK shoot the slice the many piece of nRF401 etc. That system has to automate the degree high, the cost is low, and the physical volume is small, control precision etc. advantage, consumedly increased the product rate of production, and have the good and economic
performance with the amplitude's development foreground.

Keywords: Machine of single slice; remote control; receive; control electric machinery


目 錄
摘要……………………………………………………………………………………..3
一 概述…………………………………………………………………………..4
1 提出問題及設計方案………………………………………………………….….4
2 遙控系統的組成………………………………………………………………...4
3 SFK調制方式簡介 ……………………………………………………….…….6
二 控制系統硬件設計…………………………………………………………….9
1 穩壓電源 …………………………………………………………………….. ...9
2 AT89C2051………………………………………………………………………10
3 NRF401芯片介紹 ……………………………………………………………16
4 L298芯片介紹 …………………………………………………………………21
三 軟件編程設計………………………………………………………………...23
1 軟件設計………………………………………………………………...23
2 主程序編程設計…………………………………………………………….…25
3 設計仿真及調試…………………………………………………………………28
四 接收機靈敏度和接收距離計算………………………………………………30
五 綜合測試及誤差分析…………………………………………………..…….32
1 系統的可靠性設計……………………………………………………….……...32
2 接收系統的綜合調試………………………………………………………….33
3 使用的測試儀器 ……………………………………………………………….34
4 調試……………………………………………………….….….………..34
5 射頻電路應用設計評估……………………………………………………….36
六 設計心得……………………………………………………………………...39
謝辭…………………………………………………………………………………….40
參考文獻……………………………………………………………………...41
總電路圖…………………………………………………………………………42