氣門搖桿軸支座工藝及其夾具設計

摘  要
    本次畢業設計題目是某基座零件的工藝及其夾具設計，設計過程中綜合應用了機械制圖，機械設計，機械制造工程學和互換性與測量技術基礎等相關課程知識。本畢業設計在氣門搖桿軸支座工藝規程設計過程中，詳細地分析了氣門搖桿軸支座的加工工藝，通過工藝方案的比較與分析選擇了符合技術要求的加工工序，并對各個加工工序進行了計算，最終形成了機械加工工藝過程卡和機械加工工序卡。本設計進行了兩套鉆孔專用夾具的設計，闡述了定位方案的選擇、夾緊方案的確定、夾具體與鉆模設計，運用AutoCAD和proe完成了此專用夾具的裝配圖和零件圖以及三維模型繪制。

關鍵詞：零件加工；工藝規程設計；鉆孔；專用夾具；CAD
 
Design of Process and Fixture of valve Rocker Shaft Pedestal
Abstract
The graduation design task is design of process and fixture of a base parts. This design is comprehensively applied the knowledge of correlated curriculum such as mechanical drawing, mechanical design, mechanical manufacturing and basic technology of exchangeability measurement act. This graduation design detailed analysis process of valve rocker shaft pedestal. Process what is in keeping with technical requirements is selection through comparing and analyzing process scheme, to obtain the machinery process card and mechanical processes card. This design designed two drill hole jig fixture of rocker shaft pedestal, expounds about the positioning scheme selection, determine the clamping schemes. Brilling jig design and fixture pedestal design. Use AutoCAD and Pro/ENGINEER completed the assembly part drawing and the 3-D modeling of this special fixture.

Key Words: Parts processing; Process flow design; drill hole; Dedicated fixture; CAD

 
目  錄
1 緒論 1
1.1機械制造工藝與夾具設計的發展概況 1
1.2機械制造工藝與夾具設計相關技術的國內外現狀 1
1.3選題意義和關鍵問題 2
1.3.1 選題的背景 2
1.3.2選題意義 2
1.3.3關鍵問題 2
2 機械加工工藝與夾具設計概述 4
2.1 機械加工工藝過程中的基本概念 4
2.2機械加工工藝規程設計的基本準則 4
2.3機床夾具概述 5
2.4　工件在夾具中的定位 6
2.5工件在夾具中的夾緊 6
2.5.1夾緊裝置的組成 6
2.5.2夾緊裝置的基本要求 7
2.5.3常用夾緊機構 7
3 氣門搖桿軸支座機械加工工藝規程設計 8
3.1  零件分析 8
3.1.1 零件作用 8
3.1.2 零件工藝分析 8
3.2 工藝規程定性設計 9
3.2.1基準選擇 9
3.2.2確定加工方法、工藝路線制定 9
3.3工藝規程定量設計 11
3.3.1機械加工余量、工藝尺寸及毛坯尺寸的確定 11
3.3.2切削余量及基本工時的確定 12
4 氣門搖桿軸支座專用鉆孔夾具設計 17
4.1鉆夾具的結構形式與設計要點 17
4.1.1鉆床夾具的典型結構形式 17
4.1.2鉆床夾具的設計要點 17
4.2氣門搖桿軸支座專用鉆孔夾具總體結構方案 19
4.3鉆模與夾具體的設計 19
4.3.1鉆模的設計 19
4.3.2夾具體設計 19
4.4夾具工作能力的計算 20
4.5使用操作說明 20
5 夾具零件的三維模型 21
5.1 鉆、擴 MM孔夾具 21
5.2鉆2× MM孔夾具 23
結論 27
致謝 28
參考文獻 29
畢業設計（論文）知識產權聲明 30
畢業設計（論文）獨創性聲明 31