紅外線遙控開關的設計與實現


摘要：本文主要是圍繞紅外遙控發射接收系統的相關的理論和實踐應用進行了研究。主要包括以下的內容:根據項目要求，設計紅外遙控發射接收系統，給出了硬件設計電路和編碼解碼芯片SC2262/2272結構，詳細敘述了系統的硬件線路的設計要點和結構以及遙控電路編碼解碼的技術。文中設計的電路和控制方法適用于一般的簡單的遙控系統設計，硬件設計也有一定的實用性和通用性。

關鍵詞：紅外遙控;編碼芯片；解碼芯片；SC2262/2272

The design and implementation of Infrared remote control switch

Abstract:  this paper is mainly on the receiving system of infrared remote launch related theory and practice are studied. Mainly includes the following content: according to the requirements of the project, the design of infrared remote launch, gives the receiving system hardware circuit design and coding and decoding chips SC2262/2272 structure, this paper describes the design of system hardware circuit and control structure and key technology of coding and decoding. The design of the circuit and control method is applicable to the general simple control system design, hardware design also has certain practical and universal.
Keywords: infrared remote, Encoding chip, Decoding chips, SC2262/2272

目    錄
摘要： 1
1 引言 4
1.1 紅外線的簡述 4
2 紅外遙控原理及技術上的優缺點 4
2.1 紅外遙控原理 4
2.2 紅外遙控技術上的優缺點 5
3 遙控開關系統總體設計方案 5
3.1 硬件電路 5
3.2 編、解碼芯片的選擇 5
3.2.1 方案一 5
3.2.2 方案二 6
3.2.3 方案論證 6
4 主要組件介紹 6
4.1 編碼芯片 6
4.1 解碼芯片 8
4.3 紅外發光二極管和接收管 12
4.4 四2輸入與非門 15
5 總電路設計 16
5.1 發射電路設計 16
5.2 遙控接收電路設計 16
6 安裝調試 18
7 結束語 18
參考文獻 18
致 謝 19