拉線套注射模設計整套



包括開題報告，外文翻譯，論文，圖紙，



中文摘要


　　　本論文根據工程實際的需要完成拉線套的注射模設計。在設計中采用聚乙烯塑料注射成型,成型方式為一模兩腔,該論文具體分析了產品的工藝性,確定了所采用塑料的工藝參數和所采用的成型設備,確定了模具制作的總體方案,分析并解決了模具的總體結構和各工作部分的具體結構,并進行了一些必要的尺寸計算和強度的校核。該論文還對分型面、澆注系統、脫模機構和溫度調節系統進行了分析設計，完成了模具三維模型和工程圖設計，最后進行了主要零件加工工藝設計，完成了工藝卡片的編制，圓滿完成了模具設計所要求的各項工作。

　　　通過設計，綜合應用了大學期間的多數基礎和專業知識，加深所學知識體系，掌握了應用Solid Edge 進行塑料模具的設計方法和技巧，熟悉了工程應用設計。

　　　

關鍵字：注射模，成型，工藝設計，工程設計


 


畢業設計說明書（論文）外文摘要


Title  The Design of Plastic Injection Mould of Laxiantao


Abstract

The plastic injection mould of laxiantao based on practical engineering was designed. In the design the plastic injected and formed with (CH) 2, and there were two cavities in the mould. The technology of manufacture particularly was analyzed. The technology parameter of the plastic, the forming method, forming equipment in the course of using the mould and the collectivity blue print of mould design were confirmed. The collectivity structure of the mould and the particular structure of all the work section were analyzed and resolved. Especially, side-loosing core and constitute cores structure, conducts some necessary dimension calculate and intension inspect were adopted. The irrigate system、shuck institution and temperature adjust system were also designed. The triaxiality models and the schedule drawings of the mould were done.  Final process cards of most parts were designed, and all the work of the mould design was finished.

　　　Through this design, the knowledge of more basic and specialty was synthetically applied. The system of knowledge we learned was intensified. The methods and skills of designing plastic mould with Solid Edge were mastered, the design of engineering application was known well.

　　　


Keywords Plastic injection mould, Forming, Process design, Engineering design




目   次


1  引言 1

1.1  塑料模具的現狀及發展 1

1.2  塑料注射模具的設計步驟 2

1.3  課題任務要求 5

2  方案分析與設計 6

2.1  注射模方案一 6

2.2  注射模方案二 7

2.3  方案的選擇 8

3  拉線套注射模的詳細設計 9

3.1  塑料注射成型機的選擇 9

3.2  注射模具分型面的選擇 12

3.3  注射模具澆注系統的設計 12

3.4  注射模具成型零件和模體的設計 17

3.5  注射模具的側抽芯機構 23

3.6  注射模具的頂出機構的設計 25

3.7  塑料注射模具的溫度調節系統設計 27

3.8  模具結構設計 27

4  注射模加工工藝設計 30

4.1  坯料確定 30

4.2  模板的平面加工 30

4.3  孔及孔系的加工 31

4.4  成型零件加工 33

結論 35

致謝 36

參考文獻 37

附錄：設計圖紙和工藝卡片（另外裝訂）