論文標準WORD格式排版 26頁 附車駕第二橫梁左角板A4.dxf 車駕第五橫梁承角板A4.dxf 車架第二橫梁.dxf 車架第六橫梁.dxf 車架第三橫梁.dxf1212.dxf 車架第三橫梁加固板（前右、后左）gaiA3.dxf122112.dxf 車架第三橫梁加固板（前左、后右）A3.dxf 車架第四橫梁.dxf 車架第五橫梁.dxf 車架前橫梁.dxf12121.dxf 車架前橫梁.dxf124574.dxf 六橫梁右斜撐A3.dxf 前保險杠左支架A4.dxf

摘 要
本課題結合生產實際，在農用運輸車的基礎上對低速載貨汽車車架及懸架系統進行了設計。設計內容主要包括：參與總體設計；車架、懸架結構型式分析和主要參數的確定；車架、懸架結構設計。
整個設計過程遵循以下原則和技術標準：規范合理的型式和尺寸選擇，結構和布置合理；保證整車良好的平順性能。工作可靠，結構簡單，裝卸方便，便于維修、調整；盡量使用通用件，以便降低制造成本；在保證功能和強度的要求下，盡量減小整備質量。
低速載貨汽車上用得比較廣泛的是邊梁式車架和非獨立懸架，因為邊梁式車架和非獨立懸架結構簡單，比較經濟實用，便于維修和改裝?？紤]到車架和懸架在整車設計中的作用，首先進行了車架、懸架的總體設計，然后對車架、懸架結構進行了設計，最后對車架、懸架的結構進行了受力綜合分析，在次基礎上確定了它們的主要參數。

關鍵詞： 低速貨車，車架，懸架，設計

ABSTRACT
This topic combined production with the actual and based on the agriculture transport vehicle foundation, the low speed truck frame and suspension system have been designed. The main content of the design include: the design of the participation system, analysis of the structure pattern of the frame and suspension and determination of the main parameter, design of the structure of the frame and suspension.
During the entire design process, the principles and the technical standards are followed: the reasonable pattern and the size, the structure and arrangement; the good smooth performance of the entire vehicle; with reliable work, simple structure, loading and unloading, advantageous for the service and the adjustment; as far as possible general parts, in order to reduce the cost of the production, the function and the intensity request are guaranteed, the quality is reduced as far as possible.
The side frame and non- independent suspension are used quite widely on the low speed truck, because the side frame and non- independent suspension structure are simple, economical and practical, advantageous for the service and the refit. Considered the function of the frame and suspension in the entire vehicle design, firstly that the whole of the frame and suspension system is carried on designing, then the structure of the frame and suspension have been carried on designing, finally the stress generalized analysis of the structure of the frame and suspension has been carried on, their main parameter has been determined in the inferior foundation.

Key words：Low Speed Truck， Frame， Suspension，design

第1章 前言1
第2章 總體方案論證2
2．1 設計選型原則2
2．2 設計內容3
第3章 主要尺寸參數的選定3
3．1 外廓尺寸3
3．2 質量參數3
第4章 車架譆@繕杓�4
4．1 車架的結構設計4
4．2 車架的技術要求5
第5章 車架的設計計算6
5．1車架的計算6
5．2 車架載荷分析8
5．3 車架彎曲強度的計算8
5．4 車架扭轉應力的計算11
第6章 懸架的譆@繕杓�14
6．1懸架的設計要求14
6．2懸架的兩種形式14
6．3懸架主要參數的確定17
6．4鋼板彈簧的設計20
結論23
參 考 文 獻24
致　謝25
附 錄26