AT89C52單片機無線數據傳送系統設計

本文共計56頁，13523字；

摘要和關鍵詞

【摘要】：
本系統由AT89C52單片機控制模塊、紅外收發模塊、OCM4x8C液晶顯示模塊、4x4鍵盤輸入模塊組成，通過單片機編程控制、鍵盤區位碼輸入操作，實現主從紅外雙向通信，并具有超時出錯,出錯提示等功能,具有良好的人機交換界面。而且本系統能夠通過串口與PC機通信,可以作為計算機的紅外無線終端,完成數據的上傳和下放。本報告從問題的提出、基本的設計思想到具體的物理實現以及對整套系統的設計開發過程、調試和測試都作了詳盡的說明，并配有必要的流程圖和電路圖。

【關鍵詞】：?jiǎn)纹瑱C(jī),液晶顯示,紅外通信,串口通信,PC機

【Abstract】：
The system consists of Single-Chip Microcomputer (SCM), Liquid Crystal Display (LCD), infrared emitting and admitting machine and module of keyboard inputting. By the way of writing program and inputting area code, it can accomplish correspondence between principal and subordinate machine, and can show out the message on the LCD when the transmission process arises mistakes. It also has a good man-machine intercommunication interface. The superiority is that the system can communicate with PC by serial interface. As the infrared wireless terminal of computers, it can load and unload the data. The report has a detail illustration on the prompt of the question, basic frame and concrete design. It also goes with debug routine, essential flow chart and circuit diagram.
目錄


摘要與關鍵--------------------------------------------------------------------------------------1
第一章 設計任務與技術指標----------------------------------------------------------------2
1.1設計任務--------------------------------------------------------------------------------2
1.2技術指標--------------------------------------------------------------------------------2
1.3題目簡評--------------------------------------------------------------------------------2
第二章 模塊方案比較與論證----------------------------------------------------------------2
2.1無線數據傳輸模塊-------------------------------------------------------------------2
2.2單片機控制模塊----------------------------------------------------------------------3
2.3數據顯示模塊-------------------------------------------------------------------------3
2.4數據輸入模塊-------------------------------------------------------------------------4
第三章 系統硬件設計-------------------------------------------------------------------------4
3.1系統的總體設計----------------------------------------------------------------------4
3.2單元電路的設計及原理圖----------------------------------------------------------5
3.5總電原理圖----------------------------------------------------------------------------8
第四章 系統軟件設計-------------------------------------------------------------------------8
4.1程序總體流程圖----------------------------------------------------------------------8
4.2各功能模塊流程圖-------------------------------------------------------------------9
4.3程序清單------------------------------------------------------------------------------12
第五章 系統的組裝---------------------------------------------------------------------------12
5.1整機結構圖及工藝說明------------------------------------------------------------12
5.2面板圖及可調部件說明------------------------------------------------------------12
第六章 系統調試------------------------------------------------------------------------------13
6.1電路的測試方案---------------------------------------------------------------------13
6.2測試儀器------------------------------------------------------------------------------14
6.3測試結果------------------------------------------------------------------------------14
6.4測試結論------------------------------------------------------------------------------15
6.5性能指標------------------------------------------------------------------------------15
第七章 系統電路存在的不足和改進的方向---------------------------------------------15
參考文獻----------------------------------------------------------------------------------------18
致謝----------------------------------------------------------------------------------------------19
附錄一-------------------------------------------------------------------------------------------20
附錄二-------------------------------------------------------------------------------------------21
附錄三-------------------------------------------------------------------------------------------22
附錄四-------------------------------------------------------------------------------------------23



參考文獻
《單片機原理及應用教程》 劉瑞新 機械工業出版社
《液晶顯示屏的應用技術》 深圳金鵬公司
《單片機程序設計基礎》 周航慈 北京航空航天大學出版社
《第五屆全國大學生電子
設計競賽作品選編(2001)》 全國大學生電子設計競賽組委會