畢業設計：新型鄂式破碎機設計
論文說明書共33頁，字?jǐn)?shù)總計：11566
資料內容簡介：
A0-地基部.dwg
A0-定顎板.dwg
A0-給料箱.dwg
A0-驅動皮帶輪.dwg
A0-小皮帶輪.dwg
A0-裝配圖.dwg
畢業設計論文說明書：新型鄂式破碎機設計.doc
畢業設計任務書.doc
答辯PPT演示文稿.ppt
開題報告.doc
外文翻譯.doc
新型鄂式破碎機設計
摘 要
鄂式破碎機是一種傳統的破碎裝置，因?yàn)樗哂泄ぷ骺煽?、制造容易、結構簡單、適應性強、維修方便等優點。從1858年首次制造，一直以來在粉碎行業中被廣泛應用。鄂式破碎機的破碎作業是在動、定兩塊鄂板之間進行的。其中,定鄂板是固定在機架上的，動鄂板被裝在運動的鄂板上，其表面形狀一般為齒形。鄂式破碎機主要完成破碎與排礦兩種作業，這兩種工作是依靠動鄂板周期性地往復運動完成的。按運動形式，鄂式破碎機有簡擺鄂式破碎機和復擺鄂式破碎機兩種基本形式。前者其動鄂繞機架上的固定支座作簡單的圓弧擺動；而后者其動鄂在其他機構帶動下作復雜的圓弧擺動。隨著工業的發展，復擺鄂式破碎機將發展更大型號，并將逐漸代替簡擺破碎機。
本設計采用了新的結構設計，是在傳統復擺鄂式破碎機的基礎上，將一個腔變成對稱式的兩個腔，工作時兩腔分別進行破碎和排礦工作。這樣，在一個工作周期內，每一個腔都進行了一次排礦和破碎工作，在單位時間內產量被提高了一倍。極大的提高了生產率，同時單位產量的功率消耗也降低了。
關鍵詞：鄂式破碎機，動鄂板，破碎腔，生產效率

Design of New-style Jaw Crusher
Abstract
Jaw Crusher is a traditional crusher, because it has a reliable, easy to manufacture, simple, adaptable, and easy maintenance. First manufactured from 1858, it has been widely used in the crushing industry . Jaw crusher crushing operations are moving, fixed jaw plate between the two, in which the fixed jaw plate is fixed on the rack, movable jaw plate is mounted on the moving jaw plate, the surface shape is generally for the tooth. Jaw crusher crushing and discharging was completed for both operating, the two work relies movable jaw plate periodically reciprocating complete. Press the movement form, jaw crusher has simple pendulum jaw crusher and compound pendulum jaw crusher two basic forms. The former movable jaw around its fixed bearing on the rack to make a simple swing arc; while the latter its movable jaw at other institutions driven mainly as a complex swing arc. With industrial development, compound pendulum jaw crusher larger models will be developed and will gradually replace the simple pendulum crusher.
This design uses a new structural design, is in the traditional compound pendulum jaw crusher, based on a cavity into a symmetrical two chambers, working two chambers were crushing and discharging work. Thus, in one work cycle, each chamber have carried out a row of ore and crushing work in the unit time is increased production doubled. Greatly improves productivity, while the power consumption per unit of production is also reduced.
Key words: double-cavity jaw crusher, movable jaw plate, the crushing cavity, production efficiency
目 錄
第一章 緒 論 1
1.1 破碎機的概念與應用 1
1.2 國內外鄂式破碎機現狀 2
1.3 破碎機設計的目的意義 3
第二章 新型鄂式破碎機總體方案設計 4
2.1 設計的總體要求 4
2.2 設計方案的比較及選取 4
第三章 部分參數的選定 7
3.1 嚙合角 7
3.2 公稱破碎比及排料口寬度 7
3.3 動腔的擺動行程與偏心軸的偏心距 7
3.4 連桿長度及推力板長度 7
3.5 破碎腔高度 8
第四章 鄂式破碎機零部件的設計 9
4.1 電動機選擇與確定 9
4.1.1 動腔的擺動次數 9
4.1.2 電動機的功率 9
4.1.3 電動機的轉速 10
4.1.4 選取電動機 10
4.2 破碎生產率 10
4.3 傳動帶的設計計算 11
4.4 機構受力分析 14
4.4.1 破碎力的計算 14
4.4.2 機械受力分析 14
4.5 偏心軸的設計計算 16
4.5.1 偏心軸的結構設計 16
4.5.2偏心軸的強度計算 19
4.6 軸承的使用壽命計算 20
第五章 典型零件的加工工藝 22
5.1 偏心軸的機械加工工藝流程 22
5.2 定額機械加工工藝 23
第六章 結論 25
參考文獻 26
謝 辭 27