畢業設計 電風扇上蓋注塑成型模具設計
論文說明書共28頁，字?jǐn)?shù)總計：8554
資料簡介：
電風扇上蓋注塑成型模具設計說明書.doc
開題報告.doc
任務書.doc
外文翻譯.doc
外文翻譯封面.doc
文獻綜述.doc
A4-凹模.dxf
A4-側抽芯02.dxf
A4-側抽芯型芯01.dxf
A4-型芯組合件01.dxf
A4-制件圖.dxf
A1-模具總裝配圖.dxf
A4-型芯組合件03.dxf
A4-型芯組合件02.dxf
A4-型芯總裝配.dxf
A4-滑塊.dxf
摘要：塑料注塑成型可以制作大量具有高精度和復雜型腔形狀的制件。通過用注塑模 CAE軟件 MOLDFLOW對塑件進行模流分析，選擇聚丙烯的成型工藝參數 ，設計了一模一腔的注射模具。按聚丙烯的平均收縮率設計計算模具成型尺寸。分析了電風扇上蓋的結構工藝特點,介紹了電風扇上蓋注射模結構及模具的工作過程, 介紹了模具設計方案、工作原理, 闡述了成型部件、澆注系統凝料雙層結構、頂出機構的設計特點。同時介紹了成型零件的加工制造的過程。

關鍵字：注塑模；MOLDFLOW分析；制造
Abstract ：The plastic injection molding is known to be the most effective process for producing discrete plastic parts of complex shape to the highest precision at a low cost.An injection die with a mold cavity was designed though using the injection mold CAE software MOLDFLOW to simulate plastic flow and choosing the molding parameters of polypropylene. The molding size was designed according to the average shrinkage ratio of polypropylene.Analyzing on the structural character of cover of fan, the structure of injection mold and the mold working process are introduced. The design specialities of molding parts，the double deck structure of concretionary plastic for the gating system and the ejection mechanism were presented as well.Meanwhile,manufacturing of the molding size were introduced.

Keyword：Injection mould;Analyzing of MOLDFLOW;Manufacturing
目   錄

中文摘要
英文摘要
1 塑料的工藝性分析……………………………………………………… 4
1.1 塑件的原材料分析……………………………………………… 4
1.2 塑件的尺寸精度分析…………………………………………… 4
1.3 塑件的表面質量分析…………………………………………… 4
1.4 塑件結構的工藝性分析………………………………………… 4

2 注塑過程的分析及確定成型設備選擇………………………………… 5
2.1 注塑過程的分析………………………………………………… 5
2.2 選用注塑機……………………………………………………… 7

3 注射模的結構設計……………………………………………………   8
3.1 分型面的選擇……………………………………………………  8
3.2 澆注系統的設計…………………………………………………  9
3.2.1 主流道設計………………………………………………  10
3.2.2 分流道的設計……………………………………………  11
3.2.3 澆口設計…………………………………………………  11
3.3 成型零件的設計………………………………………………   11
3.3.1 凹模、凸模和型芯的基本尺寸的確定…………………  12
3.3.2 凹模壁厚確定……………………………………………  13
3.3.3 底板厚度確定……………………………………………  14
3.3.4 成型零件的位置布置及其三維造型……………………  15
3.4 導向機構的設計………………………………………………… 18
3.5 推出部分的設計………………………………………………… 18
3.5.1 脫模力的計算……………………………………………  18
3.5.2 推件板的厚度計算………………………………………  19
3.6 側向分型與抽芯機構的設計…………………………………   19
3.7 冷卻部分的設計………………………………………………… 21
3.8 標準模架的選用………………………………………………… 22
3.9 注塑機的校核…………………………………………………… 22

4 標準零件的加工圖和非標準零件的加工工藝規劃…………………… 22

5 小結………………………………………………………………………  26

參考文獻…………………………………………………………………… 26