畢業設計 7輥型鋼矯直機設計
論文說明書共73頁，字?jǐn)?shù)總計：22052
資料內容簡介：
A0-7輥型鋼矯直機總裝配圖.dwg
A0-機架裝配圖.dwg
A0-箱座.dwg
畢業設計論文說明書：7輥型鋼矯直機設計.doc
摘要
為克服普通壓力矯直機效率低，質量差的缺點，適應連續生產的需要，本課題研制了高速連續工作的7 600輥式型鋼矯直機。
此矯直機的用途是矯直20#槽鋼。它的輥?zhàn)由霞恿伺c被矯件斷面相對應的孔型。本矯直機為開式矯直機，輥?zhàn)訛閼冶凼讲贾谩９檀瞬僮鲿r易于觀察。且換輥方便。
矯直工藝采取是上排工作輥單獨調整的矯直工藝。第二、三輥按照大變形量確定其壓下量，將軋件劇烈彎曲。第四輥壓下量適當控制，使殘余曲率值減小，后面各輥按小變形法調整壓下量，使軋件逐漸矯平。軸承選用雙列向心滾子軸承以實現軸的調整來對正孔型。
關鍵詞
受力分析 強度校核 矯直 彎曲 軋件

Abstract
To overcome shortcomings of bittle efficiecy and bad quality during the ordinary pressure straightening machine works and to adapt needs of quality of successive production ,7x600 rollmodel shape straightening machine has developed in this subject.
Use of this machine is to ing 20# channel steel .The passes are installed on the rolls and contrasted the seetion of straightened shape.This shape straightening machine is a open style machine and straightening rolls are arranged by cantilever style.So it is subjected to observe operating process and changing rolls is very convenient.As long as chaning passes,shorts of shape are straightened.
Upper,Line work rolls adjusted lonely isadopted in straightening craft .Reductions capacity of the second roll and third are determined by big deformation
Capacity .So rolled stell is crooked fiercely .Then reductions of fourth roll are controlled properly to reduce remains curature value and reductions of all back rolls are adjusted by small deformation capacity.Lastly ,the thrust ball bearing is selected to finish axial adjustment and passes are aimed at.
Keywords
The stress analyzes Intensity examination Strightening Curving Rolled piece

目錄
1總述……………………………………………………………………………… 1
1.1矯正機根據矯正特點分類…………………………………………………1
1.2軋件矯正原理………………………………………………………………3
1.3 輥式矯正機…………………………………………………………………5
1.4、輥式型鋼矯直機結構……………………………………………………12
2七輥型鋼矯直機設計計算………………………………………………… 14
2.1技術要求……………………………………………………………………14
2.2軋件的彎曲力矩……………………………………………………………16
2.3作用在各輥?zhàn)由系牧Α?6
2.4驅動功率的計算…………………………………………………………… 17
2.5軸的計算……………………………………………………………………20
2.6軸承的驗算…………………………………………………………………22
2.7驗算上輥壓下螺母的強度…………………………………………………24
2.8調整上輥所用電機的選擇…………………………………………………27
2.9調整機構中蝸輪蝸桿的強度計算…………………………………………30
2.10平衡彈簧的計算………………………………………………………… 36
2.11螺釘“1”的強度計算……………………………………………………37
2.12“M”部計算，驗算頭部”H”受剪情況…………………………………38
3程序……………………………………………………………………………… 40
英文參考資料………………………………………………………………………42
中文翻譯…………………………………………………………………………… 59
總結………………………………………………………………………………… 71
參考文獻…………………………………………………………………………… 72
致謝……………………………………………………………………………………73