畢業設計 金相拋光機設計（含ProE三維圖）
論文說明書共93頁，字數總計：26431
資料簡介：
ProE三維圖
A1-卷筒.dwg
A4-板1.dwg
A4-板.dwg
A0-變速箱.dwg
A1-齒輪.dwg
A4-蓋2.dwg
A4-蓋.dwg
A0-拋光機起升機構.dwg
A3-拋光機軸.dwg
A1-拋光機裝置.dwg
A4-套.dwg
A1-卷筒體.dwg
A1-變速箱主軸.dwg
A0-轉盤2000.dwg
A0-總裝圖.dwg
說明書.doc
任務書.doc
摘 要

金相拋光機是一種復合式多功能金相拋光機，為適應我國深基礎和連續墻以及水利、紡織的發展與需要，結合大口徑金相拋光機灌注樁和地下連續墻施工的特點，為解決在復雜地層、硬巖中成孔而研制，特別卵石層、基石、漂石層能大幅度提高施工效率，在各種成孔方法中是比較經濟有效的方法。
金相拋光機是集回轉、沖擊鉆進工藝于一體的多功能復合型金相拋光機，用轉盤回轉鉆進時可用于第四世紀覆蓋層，沖擊鉆進時可用于卵石、灰?guī)r、花崗巖等硬巖地層。
本金相拋光機的特點是結構簡單，緊湊，而且各種操作手柄布置合理，操作簡單，便于使用與維護。

關鍵詞：金相拋光機 變速箱 轉盤


Abstract

The types GCPS-20 drill the machine is a kind of compound type multi-function drill the machine, in order to adapt the our country development and demands of the deep foundation and consecution wall and marine hydraulic engineering, the bridge engineering, combine the big caliber to drill the machine to infuse to note the stake and the characteristics of underground continuous wall construction, in order to solve to become the bore but research to manufacture in complicated geologic strata, hard rock, significant exaltation of ability of special egg stone layer, sill, the stone layer construction efficiency, is a more economic valid method in variously become the bore method.
Drill the machine is to gather the turn-over and pound at to drill into the craft in the integral whole of multi-function and compound type drill the machine, can used for to overlay the layer the fourth century while using to turn the dish turn-over to drill into, can used for the hard rock geologic strata of egg stone, ash rock, granite...etc. while pounding at to drill into.
Drill the characteristics of the machine originally is a structure simple, tightly packed, and various operation hand handle arrange reasonable, operate in brief, easy to usage and support.

Keyword：The impact drill into Become soon box
Deceleratethe machine Turn the dish
目 錄
摘 要……………………………………………………………………………I
Abstract ………………………………………………………………………II

第1章 緒論 ……………………………………………………………………1
1.1 項目的研究意…………………………………………………………1
1.2 國內外科技現狀………………………………………………………1
1.3 設計產品的用途和應用領域…………………………………………1
第2章 金相拋光機的總體設計 ………………………………………………………2
2.1 總體布局設計…………………………………………………………2
2.1.1 傳動系統………………………………………………………2
2.1.2 氣動系統………………………………………………………2
2.1.3 電氣系統………………………………………………………2
2.1.4 工具系統………………………………………………………2
2.1.5 各部件的功能…………………………………………………2
2.2 主要設計參數…………………………………………………………3
2.3 主要性能特點…………………………………………………………4
第3章 動力機確定 ……………………………………………………………5
3.1 按鉆頭鉆進所需功率計算……………………………………………5
3.2 按金相拋光機沖擊鉆進所需功率計算………………………………………7
第4章 帶輪選擇 ………………………………………………………………9
第5章 變速箱的設計及計算…………………………………………………12
5.1 變速箱的結構特點 …………………………………………………12
5.2 結構計算 ……………………………………………………………12
5.2.1 初步選定 ……………………………………………………12
5.2.2 選定變速箱傳動公比 ………………………………………12
5.2.3 按彎曲強度確定齒輪模數 …………………………………13
5.2.4 按接觸強度確定齒輪分度圓直徑與中心距 ………………14
5.2.5 齒寬的確定 …………………………………………………15
5.2.6 齒輪齒數確定 ………………………………………………16
5.2.7 計算齒輪相關參數、確定齒輪 ……………………………16
5.3 錐齒輪計算 …………………………………………………………17
5.3.1 初步計算 ……………………………………………………17
5.3.2 幾何計算 ……………………………………………………17
5.4 齒輪校驗 ……………………………………………………………22
5.4.1 齒輪受力分析 ………………………………………………22
5.4.2 齒輪傳動齒面接觸疲勞強度校核 …………………………22
5.4.3 齒輪傳動齒根彎曲疲勞強度校核 …………………………25
5.5 變速箱軸的計算 ……………………………………………………27
5.5.1 一軸計算 ……………………………………………………27
5.5.2 二軸計算 ……………………………………………………27
5.5.3 三軸計算 ……………………………………………………28
5.6 軸的校..