雨刷機加強板修邊沖孔模三維設計

1.5萬字 27頁



【摘要】:本文介紹了雨刷機加強板拉延件修邊沖孔工序的工藝過程的設計。通過對拉延件形狀分析及結合沖壓工藝方面的知識，確定工藝方案，并重點利用了現在世界上最先進的CAD/CAE/CAM軟件—Pro/Engineer，在Part模塊、Assembly模塊、Manufacturing模塊及Drawing模塊中對沖壓模具進行三維設計。CAD/CAE/CAM在我國應用已逐漸廣泛，熟練運用Pro/Engineer、UG、Master CAM、Solid edge、IDEAS等CAD/CAM軟件進行工業設計是今后的必然趨勢。
【關鍵詞】： CAD/CAE/CAM Pro/Engineer 模塊 模具設計



【Abstract】: The 3D design of the strengthen board of the windscreen wiper has been introduced on the design of the obtruding technics . Fixed on the obtruding technics scheme, and made the 3D design of the pressing dies by the advanced CAD/CAE/CAM software --Pro/Engineer(in model Part、Assembly、Manufacturing and Drawing) emphatically, by getting across the analysis of the partˊs structure and combining the punch knowledge. Due to the application of CAD/CAE/CAM wide gradully, it is necessary to make full use of some CAD/CAE/CAM softwares on the process of industrical design, such as Pro/Engineer, UG, Master CAM, Solid edge,IDES.
【Key words】: 3D design CAD/CAE/CAM model Pro/Engineer


目 錄
一 課題來源 3
二 汽車覆蓋件模具CAD的概況 4
2.1 CAD概述 4
2.2　汽車覆蓋件模具CAD技術的現狀 4
2.3 汽車覆蓋件模具CAD的發展趨勢 5
三 模具行業 7
3.1 我國模具技術的現狀 7
3.2 我國模具技術與國外的差距 7
3.3 我國模具行業的發展趨勢 8
四 模具設計 9
4.1 分析零件整體工藝性和確定修邊沖孔方案 9
4.2 沖裁計算 10
4.3 模具結構設計 11
五 運用PRO/ENGINEER進行三維造型 14
5.1 總體設計思路 15
5.2 PRO/ENGINEER 2000I特點 15
5.3 產品零件數模與工序零件數模的設計 16
5.4 根據產品數模繪出凸凹模 18
5.5 將凸、凹模裝配到上下模座上 19
5.6 爆炸圖的建立 21
5.7 繪制產品工程圖 22
總 結 26
致 謝 27
參考文獻 28



考文獻
[1] 賀建華.CAD／CAM的應用與發展.中國計算機報
[2] 王耕耘等.覆蓋件模具CAD系統的研究.鍛壓技術,1997(4)
[3] 胡海.汽車覆蓋件模具CAD技術特點.模具工業,1998(4)