隨著科學技術的發展，調頻收音機的應用十分廣泛，尤其消費類占有相當?shù)氖袌?。從分離元件組成的收音機到由集成電路組成的收音機，調頻收音機技術已達到十分成熟的地步。從普通的調幅收音機到高級調頻收音機，調頻收音機以較高的技術含量和較高的音質得到了廣泛的歡迎。

本課題主要研究調頻收音機的設計全過程，各部分電路的組成、作用、性能指標和工作原理。設計方法主要采用了兩塊集成電路TA7335P和FS2204，使電路設計變的簡單。主要的設計思路是：由天線、輸入回路、高頻放大電路、混頻電路、本機振蕩電路、中頻放大電路、鑒頻電路、低頻功率放大電路、揚聲器組成。

本課題設計成果，基本上滿足要求，性能指標符合。本電路缺點的是音質噪聲大，電路還有一點失真等等，還需改進。

關鍵詞  調頻收音機發展、調頻收音機、調頻收音機設計

ABSTRACT

Along with the development of science and technology, FM radios are widely used, especially consumer accounts for a sizeable market. Separation of components from the radio component of the integrated circuit components from the radio, FM radio technology has reached a very mature stage. From the ordinary AM radios to senior FM radios, FM radio to a higher technological content and high sound quality has been widely welcomed. 

The main research topics FM radio entire process of design, the circuit of the composition, function, performance and principle. Design methods used two IC TA7335P and FS2204, the circuit design of a simple change. The main design ideas : from antenna input circuit, high-frequency amplifier, mixer circuit, the machine oscillation circuit, IF amplifier, Kam-frequency circuit, low-frequency power amplifier, loudspeakers component. 

Design results of this project, basically meet the requirements with performance indicators. The shortcomings of the circuit noise is the sound quality, there is little distortion circuit, and so on, need to improve. 

Keywords   FM radio, FM radio, FM radio design 

目   錄

摘 要…………………………………………………………………………………….I

ABSTRACT……………………………………………………………………………Ⅱ

1緒論……………………………………………………………………………………1

1.1課題背景……………………………………………………………………….1

1.2課題概論…………………………………………………………………………1

2調頻收音機設計………………………………………………………………………2

2.1調頻廣播與單聲道調頻收音機的基本組成………………………………………..2

        2.1.1調頻波的特點……………………………………………………………...2

        2.1.2調頻廣播的優點……………………………………………………………3

        2.1.3 單聲道調頻收音機基本組成及信號流程…………………………………...4

2.2調頻頭電路………………………………………………………………………4

2.2.1 調頻頭電路的組成、作用與要求…………………………………………5

2.2.2 輸入回路…………………………………………………………………7

2.3高頻放大電路……………………………………………………………………7

2.3.1晶體管共基極高放電路…………………………………………………….8

2.3.2場效應管共源極高放電路…………………………………………………9

2.4變頻電路………………………………………………………………………11

2.5自動頻率控制電路（AFC）…………………………………………………………12

2.6調頻頭電路實例分析……………………………………………………………13

2.7中頻放大電路……………………………………………………………………13

2.7.1作用與性能要求…………………………………………………………13

2.7.2電路分析…………………………………………………………………14

2.7.3調諧回路的種類…………………………………………………………16

2.7.4典型實例分析……………………………………………………………17

2.8 鑒頻電路與去加重電路…………………………………………………………17

2.8.1鑒頻電路…………………………………………………………………17

2.8.2鑒頻的基本方法…………………………………………………………18

2.8.3電路分析…………………………………………………………………20

2.9低頻放大電路……………………………………………………………………20

2.9.1作用、構成、性能要求………………………………………………..21

2.9.2電路分析…………………………………………………………………23

2.9.3典型實例分析………………………………………....................24

2.10整機電路分析…………………………………………………………………24

2.10.1集成電路調頻/調幅收音機設計…………………………………………25

3結論………………………………………………………………………...................26

參考文獻………………………………………………………………………………27

致謝…………………………………………………………………………………….31