摘要

蘇丹東卡哈拉主泵站位于蘇丹尼羅河旁邊，設計此泵站總的提水量為32立方米每秒，設計過程中采用的是9臺立式斜流泵，8臺泵參與工作，一臺備用，每臺斜流泵的流量為4立方米每秒，選用與泵配套的電機是在長沙電機廠找得的一種YKK系列的大型三相異步電動機 。水泵采用的是單獨鋼管出水，直到出水池，水泵采用電動機直聯驅動。泵房采用水下樁基礎形式，水泵為濕坑進水形式，水泵直接放置于河水中從河里取水，所以設計的泵房為濕室型泵房。此泵站中設計的輔助設備有起重設備、計量設備、通風設備和防水錘設備。采用的計量設備是電磁流量計，起重設備是QD型電動雙梁雙鉤橋式起重機，通風設備是軸流通風機，本泵站采用緩閉閥門來減少水錘的沖擊。

關鍵詞：泵站，立式斜流泵，電機，泵房

 

Su Dandong kahala pumping stations

Abstract:

Su Dandong hala pumping station next to the Nile in Sudan，Design the pump station in water yield is 32 cubic meters per second，Used in the process of design is 9 sets of vertical oblique flow pump，8 pump to participate in the work，A backup，Each oblique flow pump flow rate of 4 cubic meters per second，Selection of motor and pump matching is in changsha motor factory have to find a large YKK series three-phase asynchronous motor。Pump uses is separate steel pipe water, until out of the pool, water pump driven by motor straight league. Pump adopts the form of underwater pile foundation, the water pump is a wet pit water form, water pump placed directly on the river of water from the river, so the design of the pump room for wet room type pump room. This pump station in the design of auxiliary equipment lifting equipment, measuring equipment, ventilation equipment and water hammer. Is the electromagnetic flowmeter, measuring equipment used lifting equipment is QD type electric double double beam bridge crane, ventilation is axial flow blower, the pump station adopts gradual closing valve to reduce the impact of water hammer.

Key word：pump stations，vertical oblique flow pump，motor，pump house

目 錄

第1章 1

1緒論 1

1.1 設計內容 1

1.1.1 設計題目：蘇丹東卡哈拉主泵站的概念設計及主泵選型設計 1

1.1.2 設計目的 1

1.1.3 泵站設計水量：32m3/s。 2

1.1.4 設計任務 2

1.2 設計資料 2

第2章 計算說明書 3

2.1水泵和電機的初步選擇 3

2.1.1 泵站的組成及特點 3

2.1.2 泵站設計流量的確定 4

2.1.3 管路總體布置及其設計 4

2.1.4 泵站設計揚程估算 7

2.1.5 初步選擇水泵和電機 7

2.2 水泵安裝高程的校核 11

2.3水泵機組的基礎設計 11

2.3.1 布置機組和管道 13

2.4 泵房形式的選擇 14

2.5 泵房內部布置及其尺寸的確定 14

2.5.1 設備布置尺寸的一般要求 14

2.5.2 泵房內布置及尺寸確定 15

2.6 泵站總體布置 16

2.7 集水室設計 17

2.8 輔助設備的選擇 18

2.8.1 機組冷卻系統 19

2.8.2 計量設備 20

2.8.3 起吊設備 21

2.8.4 通風設備 22

2.8.5 排水設備 24

2.8.6 防水錘設備 25

2.9 泵房建筑高度和平面尺寸的確定 26

總結與體會 26

謝辭 27

參考文獻 27