1.5萬 29頁
摘 要
隨著科學技術的發展，射頻電路設計方法日趨成熟，射頻覆蓋的頻率范圍也越來越寬。當前，射頻和數字設計已經開始越來越接近，所以，在典型的通信系統設計中，需要將射頻和數字設計原則結合在一起考慮。盡管直接將射頻信號數字化仍然存在困難，但是在很多通信系統中數字信號處理正在扮演著越來越重要的角色。射頻發射系統主要由前置放大器、上變頻器、振蕩器、濾波器、功率放大器及天線組成。其功能是將所要發送的基帶信號經過調制后，將頻譜搬移到射頻上，再經過高頻放大，達到額定功率之后，饋送到天線，發送到空間去。本系統是設計一個發射頻率為900MHz的射頻前端發射機。其中重點分析了上變頻器、功率放大器、及天線的設計方法與性能要求，并采用ADS (Advanced Design System)軟件對功率放大器和天線進行了S參數仿真分析。最后，應用AC仿真器對發射機的整機系統進行了預算增益仿真分析，設計基本達到了要求。

關鍵詞：微波/射頻；通信發射機；射頻前端；ADS；上變頻

Abstract
Its function is want to send out of the basic moves the frequency chart to move to a radio frequency after taking a letter number process make up, pass by again high frequency to enlarge, attain a sum settle power after, the sends to antenna, sending out space. This system is to design a radio frequency heads whichshoots the frequency as 900 MHz to shoot machine. Among them, the point analyzed to change design method and function request of Up Mixer , Power Amplifier , and Antenna up.Combine adoption ADS the software carried on S parameter to imitate true analysis to the power enlarger and the antenna.The last,apply AC to imitate a true machine to shoot machine of the whole machine system carried on budget to increase a benefit to imitate true analysis, and the design basic come to an a purpose.

Keyword: Microwave/Rradio Frequency ;The correspondence shoots machine;Radio Frequency Head;ADS;Up Mixer

目 錄
摘 要
Abstract
第一章 緒 論
第二章 發射機功能模塊的設計與仿真
第三章 發射機系統設計與仿真
3.1 系統仿真原理
3.2 預算增益仿真結果分析
第四章 總 結
參考文獻
致 謝