位移測量系統的畢業設計-論文.doc
約41頁DOC格式手機打開展開
位移測量系統的畢業設計-論文,目錄第一章緒論················································· 1.1位移測量及其傳感器簡介·································· 1.2國內外位移測量技術簡介··································第二...
內容介紹
此文檔由會員 qw-vzwcyg 發布
目 錄
第一章 緒論·················································
1.1位移測量及其傳感器簡介··································
1.2國內外位移測量技術簡介··································
第二章 原理說明及方案選擇···································
2.1 位移測量理論的簡要介紹··································
2.2 方案選擇及原理··········································
2.2.1鑒相原理·············································
2.2.2用軟件實現脈沖的鑒相和計數···························
2.2.3用硬件實現脈沖的鑒相和計數···························
2.2.4用單片機內部計數器實現可逆計數·······················
2.3 位移測量參數及電路參數分析······························
2.3.1MCS-51的定時器/計數器簡介····························
2.3.2定時器模式選擇位·····································
第三章 系統電路的設計 ········································
3.1 硬件電路的設計···········································
3.1.1 單片機的選擇 ·········································
3.1.2 AT89C51的介紹········································
3.1.3 光電編碼器的選擇 ·····································
3.1.4 1XP8001-1簡介········································
3.2 軟件的設計···············································
第四章 顯示部分···············································
4.1 LED顯示器 ················································
4.2 LCD顯示器 ················································
4.2.1 LCD的分類及特點 ······································
4.2.1筆段式LCD液晶顯示器的驅動·····························
4.2.2 LCD顯示模塊LCDM(Liquid Crystal Display Module)······
4.3 LCD顯示器的驅動接口 ······································
第五章 仿真實現················································
5.1 PROTEUS仿真軟件簡介·······································
5.2 KEIL與PROYEUS的聯合使用··································
結論······························································
謝辭······························································
參考文獻··························································
附錄一 系統電路原理圖············································
附錄二 程序清單··················································
附錄三 仿真電路圖················································
第一章 緒論·················································
1.1位移測量及其傳感器簡介··································
1.2國內外位移測量技術簡介··································
第二章 原理說明及方案選擇···································
2.1 位移測量理論的簡要介紹··································
2.2 方案選擇及原理··········································
2.2.1鑒相原理·············································
2.2.2用軟件實現脈沖的鑒相和計數···························
2.2.3用硬件實現脈沖的鑒相和計數···························
2.2.4用單片機內部計數器實現可逆計數·······················
2.3 位移測量參數及電路參數分析······························
2.3.1MCS-51的定時器/計數器簡介····························
2.3.2定時器模式選擇位·····································
第三章 系統電路的設計 ········································
3.1 硬件電路的設計···········································
3.1.1 單片機的選擇 ·········································
3.1.2 AT89C51的介紹········································
3.1.3 光電編碼器的選擇 ·····································
3.1.4 1XP8001-1簡介········································
3.2 軟件的設計···············································
第四章 顯示部分···············································
4.1 LED顯示器 ················································
4.2 LCD顯示器 ················································
4.2.1 LCD的分類及特點 ······································
4.2.1筆段式LCD液晶顯示器的驅動·····························
4.2.2 LCD顯示模塊LCDM(Liquid Crystal Display Module)······
4.3 LCD顯示器的驅動接口 ······································
第五章 仿真實現················································
5.1 PROTEUS仿真軟件簡介·······································
5.2 KEIL與PROYEUS的聯合使用··································
結論······························································
謝辭······························································
參考文獻··························································
附錄一 系統電路原理圖············································
附錄二 程序清單··················································
附錄三 仿真電路圖················································
TA們正在看...
- db63t611-2007雷電防護裝置檢測質量管理.doc
- dbj07-2006建設工程文明施工標準.doc
- dbj08-230-1998高鈣粉煤灰混凝土應用技術規程.doc
- dbj08-47-1995智能建筑設計標準.doc
- dbj52-55-2008貴州省高速公路機制砂高強混凝土技術...doc
- 中山大學流行病題庫.pdf
- 心電信號壓縮感知采樣與恢復.doc
- 自動水產養殖作業船的視覺導航技術研究.doc
- 移動式x射線機的逆變電路設計.doc
- 虹膜識別算法研究.doc