10KV變電站電氣部分設計


頁數：32 字?jǐn)?shù)：18740


目 錄

摘要…………………………………………………………………………………………1
關鍵詞…………………………………………………………………………………………1
Abstract…………………………………………………………………………………1
Key words……………………………………………………………………………………1
0 緒論…………………………………………………………………………………2
1 變電站電氣主接線設計……………………………………………………………………3
1.1 主接線的設計原則和要求 …………………………………………………………3
1.1.1 主接線的設計原則 ……………………………………………………………3
1.1.2 主接線設計的基本要求 ………………………………………………………3
1.2 主接線的設計 ………………………………………………………………………3
1.2.1 設計步驟 ………………………………………………………………………3
1.2.2 初步方案設計 …………………………………………………………………4
1.2.3 最優方案確定 …………………………………………………………………4
1.3 主變壓器的選擇 ……………………………………………………………………5
1.4 導線的選擇與短路電流計算 ……………………………………………………… 6
1.4.1 導線的選擇 …………………………………………………………………………6
1.4.2 短路計算的目的、步驟……………………………………………………………7
1.5 變壓器的參數計算及短路點的確定………………………………………………8
2 電氣設備及變壓器選擇與校驗………………………………………………………… 9
2.1 電氣設備選擇的一般規定…………………………………………………………10
2.1.1 一般原則………………………………………………………………………10
2.1.2 有關的幾項規定………………………………………………………………10
2.2 各回路持續工作電流的計算………………………………………………………10
2.3 高壓電氣設備選擇…………………………………………………………………10
2.3.1 斷路器的選擇與校驗…………………………………………………………10
2.3.2 隔離開關的選擇及校驗………………………………………………………12
2.3.3 電流互感器的選擇及校驗……………………………………………………13
2.3.4 電壓互感器的選擇……………………………………………………………14
2.3.5 熔斷器的選擇…………………………………………………………………15
2.4 無功補償設計……………………………………………………………………… 15
2.4.1 無功補償?shù)脑瓌t與基本要求……………………………………………………15
2.4.2 補償裝置容量的確定………………………………………………………………16



3 變電站配電裝置設計………………………………………………………………… 16
3.1 概述…………………………………………………………………………………16
3.2 高壓配電裝的選擇…………………………………………………………………17
3.3 電氣總平布置………………………………………………………………………19
3.3.1 電氣總平面布置的要求………………………………………………………19
3.3.2 電氣總平面布置………………………………………………………………19
3.4 本變電站的配電裝置………………………………………………………………19
4 防雷與接地………………………………………………………………………………20
4.1 防雷措施………………………………………………………………………………20
4.1.1 變配電所的防雷措施…………………………………………………………20
4.1.2 架空線路的防雷措施…………………………………………………………21
4.2 接地設計……………………………………………………………………………21
5 數字化變電站主要技術特征和架構體系…………………………………………… 22
5.1 數字化變電站主要技術特征………………………………………………………22
5.2 數字化變電站的架構體系 ………………………………………………………24
6 結論……………………………………………………………………………………25
致謝……………………………………………………………………………………25
參考文獻…………………………………………………………………………………25
附錄………………………………………………………………………………………26



10KV變電站電氣部分設計

摘要：本次畢業設計的題目是《10KV變電站電氣部分設計》。根據設計的要求，在設計的過程中，根據變電站的地理環境、容量和各回路數確定變電站電氣主接線和站用電接線，并選擇各變壓器的型號；進行參數計算、畫等值網絡圖，并計算各電壓等級側的短路電流，列出短路電流結果表；計算回路持續工作電流、選擇各種高壓電氣設備，并根據相關技術條件和短路電流計算結果表校驗各高壓設備。
隨著科學技術的發展，網絡技術的普及，數字化技術成為當今科學技術發展的前沿，變電站數字化對進一步提升變電站綜合自動化水平將起到極大促進作用，是未來變電站建設的發展方向?；谶@種發展的需求。利用數字化技術來解決目前綜合自動化變電站存在的問題已成為可能。通過本次設計，學習了設計的基本方法，鞏固三年以來學過的知識，培養獨立分析問題的能力，而且加深對變電站的全面了解。
關鍵詞：主接線；短路電流；電氣設備；數字化變電站


The Design for Electric Part of 10kv Tansformer Station
Student majoring in Agricultural Electrification and Automation
Tutor
Abstract：This graduation project topic is: "the Design for Electric Part of 10kv Tansformer Station”. According to the design request, in the design process, according to the transformer substation geographical environment, the capacity and various return routes number determined the transformer substation electricity host wiring and the station use electricity the wiring, and chooses various transformers the model; Carries on the parameter computation, the picture equivalent network chart, and calculates various voltages rank side the short-circuit current, lists the short-circuit current result table; Calculates the return route continually operating current, chooses each kind of high pressure electrical equipment, and verifies various high pressure unit according to the correlation engineering factor and the short-circuit current computed result table.
Along with the science and technology development, the networking popularization, the digitized technology will become now the science and technology development the front, the transformer substation digitization to further promotes the transformer substation synthesis automation level to get up to the limit the big promoter action, is the future transformer substation construction development direction. Based on this kind of development demand. Through this design, has studied the design essential method, since the consolidated four years have studied the knowledge, raises the independent analysis question ability, moreover deepens to the transformer substation comprehensive understanding.
Key words: Main Wiring; Short-circuit Current; Electrical Equipment; Digital Substation