機械設計制造及其自動化畢業設計-齒輪泵泵體前、后端面銑削專機總體設計


目    錄
摘  要 1
關鍵詞 1
1 前言 2
1.1課題研究的背景和意義 2
1.1.1課題研究的背景 2
1.1.2課題研究的意義 2
1.2 組合機床的發展趨勢 3
1.3 設計內容和重點與難點 4
1.3.1設計內容 4
1.3.2設計的重點與難點 4
2 零件分析 5
2.1零件的分析和工藝方案的擬定 5
2.1.1 零件的分析 5
2.1.2零件加工工藝方案的擬定 6
2.2切削用量的選擇 8
2.3 刀具的選擇 9
3 齒輪泵泵體前、后端面銑削組合機床總體設計 10
3.1 組合機床的特點和研究狀況 10
3.1.1組合機床的特點 10
3.1.2 組合機床的研究現狀 10
3.2齒輪泵泵體前、后端面銑削加工工序圖 11
3.3 加工示意圖 12
3.3.1 加工示意圖的作用 12
3.3.2 加工示意圖的內容 12
3.4 組合機床通用部件的選擇 13
3.4.1 銑削頭的選擇 14
3.4.2 滑臺側底座的選擇 16
3.4.3中間底座選擇及滑臺選擇 16
3.4.4墊鐵選用 17
3.5 機床聯系尺寸圖的繪制 17
3.5.1 機床聯系尺寸圖的作用和內容 17
3.6 生產率計算卡的編制 18
4 夾具設計 20
4.1 夾具的特點作用和定位方案 20
4.1.1 夾具的特點作用 20
4.1.2 定位方案 21
4.2 夾緊方案 23
4.2.1夾緊元件和夾緊點選擇 23
4.2.2 夾緊力計算 23
4.2.3 汽缸的選用 24
4.3 銑床夾具設計與裝配圖繪制 24
4.3.1 銑床夾具設計要點 24
4.3.2 銑床夾具裝配圖繪制 25
5 結論 27
參考文獻 28
致    謝 29

齒輪泵泵體前、后端面銑削專機總體設計

【摘  要】：本次畢業設計是齒輪泵泵體前、后端面銑削專機總體設計。齒輪泵泵體結構復雜，普通機床加工難度大，生產效率低。然而組合機床是以大量的通用部件為基礎,配以少量的按被加工零件特殊要求而設計的專用部件,以實現對一種或幾種零件按預先確定的工序進行加工的高效機床。它既具有專用機床的結構簡單、生產率及自動化程度較高的特點,又具有一定的重新調整能力,以適應工件變化的要求。所以為了提高生產效率，降低勞動強度，專門設計一齒輪泵泵體前、后端面銑削組合機床及其專用夾具。這次設計主要內容：齒輪泵泵體銑削加工工藝規程設計，專用組合機床得設計，機床結構方案與配置形式確定，針對這道工序進行專用夾具得設計以及外文翻譯和編輯說明書。
【關鍵詞】：組合機床，CAD，夾具，齒輪泵泵體

The End-Milling Plane Design Of Gear Pump Body Before And After

【Abstract】：The graduation project is a gear pump body before and after the end-milling plane design. Gear pump body structure of the complex, general machining difficult and low productivity.However The combination of machine tools is a lot of common parts for the foundation, was supported by a small number of special requirements for the processing parts and components for the design, to achieve one or more of the components of the pre-set process for the efficient processing machine. It has a dedicated machine simple structure, productivity and a higher degree of automation features, but also has a re-adjustment ability to adapt to changing requirements of the workpiece. So, in order to improve productivity and reduce labor intensity, specially designed gear pump a pump body before and after the combination of end-milling machine and a dedicated fixture. The main elements of design: gear pump Milling Process pump body design, a special combination of machine tool design, machine tool structure and the configuration form for this process to a dedicated fixture design and foreign language translation and editing of brochures.
【Key word】：Combination of machine,CAD, Tongs, Gear Pump