輥式破碎機主傳動系統設計

全套?。?！附圖?。?！


輥式破碎機主傳動系統設計

摘要

輥式破碎機主傳動系統主要由兩級圓錐-圓柱齒輪減速器和第三級的內齒圓柱齒輪傳動機構組成，本系統具有原理簡單、容易實現、工作可靠的優點。其減速器為一般減速機構，具有通用性。由于輥式破碎機主傳動系統設計的主要部分是減速器，因此本次設計將通過和一般減速器的比較，進行改進和優化，使之達到一個很好的設計要求。本設計主要側重于減速器的設計。
首先，本次設計將在總體方面進行了設計，確立了傳動方案，分配了各級的傳動比，并闡述了選擇這樣一個傳動方案的理由。
其次，本次設計在總體設計的宏觀基礎上，對各級傳動部件逐個分析設計，分別是圓錐齒輪傳動、斜齒圓柱齒輪傳動和內齒圓柱齒輪傳動。
再次，本次設計對減速器的高速軸、中間軸、低速軸分別詳細進行了設計。然后確立了減速器的大致框架，繪制了減速器裝配圖和若干零件圖。
最后，本次設計選取了一到兩個特殊零件進行了校核，保證了系統的安全和穩定運行。

關鍵詞：輥式，傳動，減速器，校核

Roll Crusher Main Drive System Design

Abstract

The roller crusher main drive system is composed of the cone - cylinder gear reducer and the third-class gear transmission within institutions .The system is simple in the principle, easy to realize and reliable at work. The reducer is the general slowdown framework so it has inter-operable. As the design of speed reducer is the main part of  the roller crusher main drive system, the design will be through comparison and optimization improvements for some general reducer to meet a good design requirements.The design focuses mainly on the design of speed reducer.
Firstly, this design was carried out in the overall design, established a transmission program, allotted the transmission ratio at all levels and described the reasons for such a transmission choice.
Secondly, the design was based on the macro-design , analysed and designed all transmission components which were named the cone gears drive, the helical gears transmission and the gears drive within institutions.
Third,  the high-speed reducer shaft, the intermediate shaft and the low speed shaft had been designed respectively in detail. Then a general framework of the reducer were establish and the reducer assembly drawings and a number of parts drawing were mapped.
Finally, the 1-2 special parts selected conducted a check to ensure the security and stability of  the system when to be running.

Keywords: roller, transmission, gear reducer, check

目錄

1  緒論.............................................................1
1.1  本次設計的背景及目........................................1
1.2  本次設計的主要內容........................................1
1.3  本次設計的步驟............................................2
1.4  本次設計的具體要求........................................2
2  傳動系統總體設計.................................................3
2.1  傳動方案的擬定及說明......................................3
2.2  總體布置簡圖..............................................3
2.3  總體設計..................................................4
2.3.1  電動機的選擇.......................................4
2.3.2  傳動裝置的總傳動比及其分...........................4
2.3.3  傳動裝置的運動和動力參數計算.......................5
3  傳動件設計計算...................................................6
3.1  直齒圓錐齒輪傳動的設計....................................6
3.1.1  設定齒輪類型、精度等級、材料及齒數.................6
3.1.2  按齒面接觸強度設計.................................6
3.1.3  按齒根彎曲強度設計.................................8
3.1.4  幾何尺寸計算.......................................9
3.2  斜齒圓柱齒輪的設計.......................................10
3.2.1  選定齒輪類型、精度等級、材料及齒數................10
3.2.2  按齒面接觸強度設計................................11
3.2.3  按齒根彎曲強度設計................................13
3.2.4  幾何尺寸計算......................................14
3.3  內齒圓柱齒輪的設計.......................................15
3.3.1  設定齒輪類型、精度等級、材料及齒數................15 
3.3.2  按齒面接觸強度設計................................16
3.3.3  按齒根彎曲強度設計................................17
3.3.4  幾何尺寸計算......................................19
3.3.5  傳動比校核........................................20
4  軸的設計........................................................20
4.1  軸的材料選擇和最小直徑估算...............................20
4.2  軸的結構設計.............................................21
4.2.1  高速軸的設計......................................21
4.2.2  中間軸結構設計....................................21
4.2.3  低速軸的結構設計..................................22
5  軸的校核........................................................23
5.1  軸的力學模型的建立........................................23
5.1.1 軸上力的作用點位置和支撐跨距的確定..................23
5.1.2 軸上力的作用點位置和支撐跨距的確定..................23
5.2  計算......................................................24
5.2.1 計算軸上的作用力....................................24
5.2.2  計算支反力.........................................25
5.2.3  繪制轉矩、彎矩圖...................................26
5.2.4  彎扭合成強度校核...................................27
5.2.5  安全系數法疲勞強度校核.............................27
6  鍵的選擇與校核..................................................29
7  滾動軸承的選擇..................................................29
8  聯軸器的選擇....................................................30
8.1  載荷計算..................................................30
8.2  載荷計算..................................................30
9  密封與潤滑以及箱體附件的設計....................................31
結論...............................................................32
致謝...............................................................33
參考文獻...........................................................34