目 錄
摘要…………………………………………………………………………………………………I
Abstract……………………………………………………………………………………………II
第1章 緒論………………………………………………………………………………………
1.1引言…………………………………………………………………………………
1.2設計的要求………………………………………………………………………………
1.2.1 設計的基本原則
1.2.2 設計的主要內容
1.2.3 PLC控制系統的一般設計步驟
第2章 基于PLC雙電源開關總體方案設計………………………………………………
2.1 引言………………………………………………………………………………………
2.2 設計要求…………………………………………………………………………
2.3 總體方案的確定………………………………………………………………………
第3章 基于PLC雙電源開關控制系統硬件設計………………………………………
3.1 引言
3.2 電氣控制方案設計
3.3 PLC型號的選擇………………………………………………………………………
3.4 特殊功能模塊的選擇………………………………………………………………
3.4.1 技術參數……………………………………………………………………
3.4.2 FX2N-4A/D模塊的接線方式……………………………………………
3.4.3 緩沖寄存器及設置………………………………………………………
3.4.4 檢測參數設置……………………………………………………………
3.3  I/O口設計……………………………………………………………………………
3.4 系統外部連線電路設計……………………………………………………………
第4章 基于PLC雙電源開關控制系統軟件設計
4.1 引言……………………………………………………………………………
4.2 PLC控制系統程序設計主要步驟……………………………………………
4.3 流程圖設計…………………………………………………………………
4.4 梯形圖設計…………………………………………………………………
4.5 PLC程序語句表…………………………………………………………………

第5章 心得體會…………………………………………………………………
結論…………………………………………………………………………………………
參考文獻……………………………………………………………………………………
致謝…………………………………………………………………………………………
附錄…………………………………………………………………………………………

摘要：隨著人們對供電可靠性要求越來越高，很多場合需要用兩路電源來保證供電的可靠性，這就需要一種雙電源切換器在兩路電源之間進行可靠切換。采用可編程控制器(PLC)解決這類問題具有獨特的優勢，在電氣自動化方面具有廣闊的應用前景和很大的市場潛力。與傳統繼電控制系統相比較，可編程控制器(PLC)的優勢在于：體積小型化，高度集成，同時還有數字運算、數據處理和數據通訊功能。PLC作為新一代的工業控制裝置，結構簡單、性能全面、可靠性高。本課題是基于可編程控制器的雙電源開關設計，用以實現雙電源開關的自投自復，缺相和欠壓保護，使之可以適應用電要求較高企業的需求。本文分析了基于PLC的雙電源開關的設計理念，設計方法，主要闡述了系統硬件、軟件的設計。

關鍵詞：雙電源切換；PLC；數據處理；缺相和欠壓保護

PLC-based design of dual-power switch

Abstract: With increasing demands for high reliability, a number of occasions the need to use two power supplies to ensure reliability of electricity supply, which requires a dual power switch between the two reliable switching power supply. The use of programmable logic controller (PLC) to solve this problem has a unique advantage in electrical automation applications have broad prospects and great market potential. Relay control system with the traditional, compared to programmable logic controller (PLC) has the advantage of being: the volume of smaller, highly integrated, but also the number of computing, data processing and data communication functions. PLC as a new generation of industrial control devices, simple structure, the performance of a comprehensive, high reliability. This topic is based on the programmable logic controller design of dual-power switch, dual power switch for the automatic switch from the complex, lack of phase and under-voltage protection, so that electricity can be adapted to the needs of demanding enterprises. This paper analyzes the PLC-based dual-power switch design, design methods, mainly on the system hardware and software design.

Key words: dual-power switch; PLC; data processing; missing phase and undervoltage protection

...