摘 要：

本文介紹了1553B數據總線的傳輸協議和工作方式，采用RS232串口作為通信握手方式，以自動測試系統作為總線控制器，被測目標板作為遠程終端，通過軟件尋址方式實現了對被測目標板的1553B雙總線的自動測試，并給出了相應的硬件和軟件的實現方法。
關 鍵 詞：自動測試; 通信; 串口; 1553B; RS232;
The Application of 1553B Bus In the Interface of Testing System

Abstract：This paper introduces the 1553B bus Protocol and working mode. RS232 serial interface is used as the handshake method in the communication of 1553B. The auto-test system is Bus Control while the object board is the remote terminal. The test of the two 1553B buses of the object board is completed through software addressing and the hardware and software method is given.

Keywords：Auto-test; communication; serial interface; 1553B; RS232;


5 參考文獻
[1] MIL-STD-1553 ABI/ASF manual，SBS公司，2003年