摘要：隨著科技的日益進步，基于LED現實屏的研究也越來越深，同時，人們的生活水平也越來越高，這樣，也對LED方面就提出了更高的要求。用LED器件組成電子顯示屏，不但色彩絢麗而且其制作尺寸幾乎不受限制，可以達到幾十甚至幾百平方米以上，可應用于室內外各種公共場合顯示文字、圖形、圖像、動畫、視頻圖像等信息，具有較強的廣告渲染力和震撼力，美化和豐富了人們的生活環境。
傳統LED顯示系統的控制以單片機為核心，功能較為簡單，當需要進行數據處理時，單片機的處理能力就更顯不足，不能滿足LED顯示屏發展的需要。本文將介紹一種基于ARM和CPLD控制平臺的LED全彩色顯示屏控制系統。論文首先介紹了LED顯示技術和系現實原理，然后從硬件和軟件兩個方面，分別詳細介紹了系統硬件的設計和軟件的設計，最終實現預期功能。

關鍵詞: 單片機 ARM CPLD LED 灰度















Abstract: With the increasing progress of science and technology, based on the LED screen reality more and more deep study, at the same time, people's living standards have become more sophisticated, so that LED is also on a higher demand. Composed of electronic devices with LED displays, not only colorful and attractive but also produced virtually unlimited size, can reach tens or even hundreds of square meters, can be applied to a variety of indoor and outdoor public display text, graphics, images, animation, video images and other information, the ad has a strong and powerful rendering, landscaping and rich people's living environment.
Traditional LED display system to control the single-chip microcomputer as the core function of relatively simple, when the need for data processing, the single-chip processing power is even more inadequate, can not meet the needs of the development of LED display. This article will introduce an ARM and CPLD-based control platform, full-color LED display control system. Paper introduces the LED display technology and the Department of the reality principle, and then from the two aspects of hardware and software, respectively, described in detail the design of system hardware and software design, and ultimately to achieve the desired function.

Key words: Single-chip Microcomputer, ARM, CPLD, LED, Gray
目 錄

1 緒論 1
1.1 LED大屏幕的研究現狀 1
1.2 LED大屏幕的發展趨勢 1
1.3 論文研究的內容 2
2 LED顯示屏的工作原理 3
2.1 LED工作原理 3
2.1.1 簡述 3
2.1.2 LED發光的基本原理 4
2.2 LED器件的驅動原理 5
2.2.1直流驅動 5
2.2.2恒流驅動 5
2.2.3脈沖驅動 5
2.2.4 掃描驅動 6
3 LED顯示技術的發展和基本原理 7
3.1 LED顯示技術的發展歷史 7
3.2 LED顯示技術的基本原理 8
3.2.1灰度掃描的實現 8
3.2.2 信息刷新原理 9
3.2.3掃描控制電路總體說明 9
3.2.4 彩色顯示屏的γ校正 10
3.2.5顯示屏均勻性的改造 12
3.2.6 亮度控制器模塊 13
4 LED彩屏顯示系統的硬件設計 13
4.1 ARM芯片簡介及硬件電路設計 13
4.1.1 ARM芯片簡介 13
4.1.2 ARM的硬件電路設計 15
4.2 CPLD技術簡介及硬件電路設計 20
4.2.1 CPLD技術簡介 20
4.2.2 CPLD的硬件電路設計 21
5 LED彩屏顯示系統的軟件設計 21
5.1 ARM的軟件設計 21
5.1.1 ARM匯編語言的程序結構 21
5.1.2基于ARM的系統初始化過程 22
5.2掃描驅動電路的CPLD軟件設計 23
5.2.1 Altera可編程程邏輯器件開發軟件介紹 23
5.2.2 利用VHDL語言實現顯示控制 24
6 仿真效果及結論 25
6.1 仿真效果 25
6.2 結論 26
參考文獻 27
致 謝 28