摘 要
本文針對φ130mm鏈徑超大型錨絞機，重點研究其純水液壓控制系統中的液壓柱塞泵。通過理論設計方法設計符合要求的純水軸向柱塞泵。研究其運動學特性、動力學特性以及配流特性，提出優化結構的依據。本文研究的主要內容包括：
1．對純水軸向柱塞泵的設計進行研究，提出其關鍵零部件的設計方法。根據
φ130mm鏈徑超大型錨絞機純水液壓系統的工作需求，借助MATLAB的程序方法計算出純水軸向柱塞泵的主要結構參數。
2．運用三維建模軟件PRO/E對純水軸向柱塞泵以及其相應的流場分別進行幾何建模。在對柱塞泵進行幾何建模的過程中，考慮到主要研究柱塞泵的動力學特性，對柱塞泵的殼體及支撐進行簡化省略處理；在對流場進行建模的過程中，考慮到油膜影響建模分析的復雜性，在不影響分析結果的前提下對其進行簡化忽略處理。
3．利用ADAMS建立該純水軸向柱塞泵的物理模型。建立其剛性體模型，分析其運動學特性。對軸向柱塞泵的關鍵零部件進行柔性化處理，運用ADAMS和ANSYS等聯合解決多體系統剛柔耦合動力學分析和仿真，分析其動力學特性。通過運動學特性和關鍵零部件的動力學特性來驗證設計的合理性。
4．分析純水軸向柱塞泵的配流特性。運用計算流體動力學CFD的技術手段，分析純水軸向柱塞泵的流場規律。通過得出的壓力、湍流動能等流場規律，優化配流盤結構，改善柱塞泵配流特性，提高工作性能。

關鍵詞 純水軸向柱塞泵；結構設計；動力學特性；配流特性
Abstract
The subject of this paper is the super windlass of φ130mm diameter anchor chain. And this paper focuses on the study of hydraulic plunger pump of water hydraulic control system.The water axial piston pump is designed to meet the requirements by the design method of theory. Through the analysis, the kinematics characteristics, dynamic characteristics and match flow characteristics are studied. And optimization structure basis is proposed. The major research contents of this paper are as follows.
1. The design of water axial piston pump is studied. Design method of the key parts is proposed. According to the operational requirements of pure water hydraulic control system of the super windlass of φ130 mm diameter anchor chain, MATLAB program method is used to calculate the main structural parameters of the water axial piston pump.
2. 3D modeling software PRO/E is used to respectively establish geometric model of pure water axial piston pump and its corresponding flow field. In the process of geometry modeling of the piston pump, process of the piston pump shell and support is simplified and omit, considering the main research is the piston pump kinematics characteristics; In the process of modeling the flow field, oil film influence on the complexity of the modeling analysis is considered. Under the premise of model has no influence on analysis results, process of the flow field is simplified and ignored.
3. ADAMS is used to establish physical model of the pure water hydraulic plunger pump. Its rigid body model is established and its kinematics characteristic is analyzed. Its key parts are flexibly processed. Ally of ADAMS and ANSYS is used to solve the analysis and simulation of rigid-flexible dynamic characteristics of multi-body system. The dynamics characteristics are analyzed. The kinematics characteristics and dynamic characteristics of key parts can verify the rationality of the design.
4. The flow characteristic of the water axial piston pump is analyzed. Law of flow field of water axial piston pump is analyzed by using the technology of CFD. After rule of the flow field is get, such as the pressure, turbulent kinetic energy. Structure of the valve plate is optimized, flow characteristics of the piston pump and the work performance are improved.

Keywords water axial piston pump, structure design, dynamic characteristics, flow
characteristics

目 錄
摘 要 I
Abstract II
第1章 緒論 1
1.1 選題背景和意義 1
1.2 國內外研究現狀與發展趨勢 2
1.2.1 錨絞機 2
1.2.2 純水液壓技術 2
1.2.3 虛擬樣機技術在液壓柱塞泵中的應用 3
1.2.4 CFD技術在液壓柱塞泵中的應用 4
1.3 本文研究的主要內容和章節安排 5
1.3.1主要內容 5
1.3.2章節安排 6
第2章 純水軸向柱塞泵設計方法 8
2.1 結構選型及主要參數確定 8
2.1.1 純水軸向柱塞泵主體選型 8
2.1.2主要參數的確定 8
2.2 柱塞設計方法 9
2.3 配流盤的設計 11
2.4 純水液壓系統 13
2.5 PISO算法 14
2.6 本章小結 18
第3章 軸向柱塞泵動力學特性分析 19
3.1幾何模型建立 19
3.2數據轉換 24
3.2.1 數據轉換接口 24
3.2.2 數據轉換步驟 24
3.3 物理模型建立 26
3.4 仿真結果及分析 28
3.5 柔性化分析 29
3.5.1 關鍵零件離散化 29
3.5.2 生成MNF文件 30
3.5.3 柔性仿真分析 31
3.6 本章小結 34
第4章 軸向柱塞泵配流特性分析 35
4.1 配流特性說明 35
4.1.1 壓力突變激聲 35
4.1.2 氣蝕激發的噪聲 35
4.2 流場仿真建模 36
4.2.1 流場工況分析 36
4.2.2 建立幾何模型 36
4.3 建立計算模型 37
4.3.1 簡化模型 37
4.3.2 劃分網格 39
4.3.3 定義邊界條件 41
4.4 數值模擬 42
4.5 本章小結 48
第5章 配流特性分析結果與結構優化 49
5.1 原始結構數值計算 49
5.1.1 柱塞腔由排油腔向吸油腔運動 49
5.1.2 柱塞腔由吸油腔向排油腔運動 52
5.2 優化結構數值計算 55
5.2.1 柱塞腔由排油腔向吸油腔運動 55
5.2.2 柱塞腔..