完整版大學病床呼叫系統畢業設計，已修改完格式

摘  要
醫院已經從人工管理模式向智能化方向發展。
“病床呼叫系統”可以實現對病房的智能化管理，可實現呼叫、求救警報、信息存儲、顯示等等功能?；颊咴谧≡浩陂g，可能會在任意時間請求醫生或護士進行診斷或護理。病床求助呼叫是傳送臨床信息的重要手段，病床呼叫系統是患者向值班醫生或護士發出緊急呼叫的工具，要將患者的請求快速傳給值班醫生或護士，并在護士站的監控中心留下準確完整的記錄，是提高醫院和病室護理的重要組成部分。
本系統以STC89C51單片機為核心輔以4個外接鍵盤、LED點陣顯示電路和部分簡單模擬和數字電路組成的，能夠?qū)崿F(xiàn)病人和醫護人員之間信息的傳遞。在該設計中模擬2個病房每個病房2個病床編號0101/0102和0201/0202，每個病床都有一個按鍵，當患者有需要時，按下按鍵，此時 值班室的顯示屏可顯示此患者的病房號和床位號，醫護人員按下“響應”鍵取消當前呼叫。此系統能夠為醫院提供一個成本低、效率高、操作方便和易于安裝維護的快捷系統。
關鍵詞：單片機;鍵盤;點陣;LED;病床呼叫系統
 
Abstract
Management model of hospital from artificial intelligent direction.
Bed call system can achieve the intelligent management of the ward; can realize the call, distress alert, information storage, display and more. Patients during hospitalization may at any time request the doctor or nurse for the diagnosis or nursing. Beds help call is an important means of transmission of clinical information, bed call system is a tool for patients issued an urgent call to the on duty doctor or nurse, you want to the patient's request quickly passed to the duty doctor or nurse, and left the nurses’ station monitoring center accurately the complete record is an important part to improve the care of hospitals and sick rooms.
STC89C51 single-chip at the core of the system combined with 4 external keyboard, LED dot-matrix display circuit and some simple consisting of analog and digital circuits, transmission of information between patients and health care personnel can be achieved Simulation in the design of two wards each ward two beds in 0101/0102 0201/0202, each hospital bed has a button, when the patients when necessary, press the button, the display of the duty room to display in this patient ward number and bed number, health care workers press the "response" to cancel the current call. This system can provide a low cost, high efficiency, easy operation and easy installation and maintenance system for the hospital.
Keywords：MCU; Keyboard; Dot matrix; LED display; Calling system
 
目  錄
1.  緒論 1
1.1  課題背景 1
1.2  病床呼叫系統發展概況 1
1.3  課題研究的目的和意義 2
2.  51系列單片機的簡介 3
2.1  單片機的發展介紹 3
2.2  單片機的結構特點 3
2.3  單片機的實際應用 3
2.4  控制器STC89C51 4
2.5  單片機的發展趨勢 6
2.6  病床呼叫系統發展 7
3.  接口技術和程序設計語言 9
3.1  鍵盤接口 9
3.2  顯示器接口 9
3.2.1  液晶顯示器 9
3.2.2  LED點陣顯示屏 9
3.2.3  數碼管顯示原理 10
3.3  程序設計語言 11
3.3.1  單片機C語言的特點 11
3.3.2  單片機C語言使用的編程軟件 11
4.  基于單片機的病床呼叫系統的設計實現 12
4.1  系統總體設計 12
4.1.1  功能要求 12
4.1.2  設計方案 12
4.1.3  總體結構框圖 12
4.2  系統硬件設計 13
4.2.1  硬件構成示意圖 13
4.2.2  外圍電路設計 13
4.3  系統軟件設計 19
4.3.1  設計的軟件環境簡介 19
4.4  系統的調試與結果 21
4.4.1  調試界面顯示 21
4.4.2  程序開發及代碼調試 22
結論 26
致謝 27
參考文獻 28
附錄 29