論文標準WORD格式排版 18頁

摘 要
擠壓技術所涉及的范圍很廣，本論文主要介紹了擠壓模具的設計過程中的最基本的內容。其中主要包括了擠壓模具的設計步驟，設計要領，設計細節以及注意事項。
模具是一種生產效率很高的工藝裝備，擠壓模具作為模具的一種在塑性成形領域有著很重要的地位。另外，與其他的成形技術相比較，擠壓加工具有高產、優質、低消耗的優點，在技術和經濟上有著很高的使用價值因此選擇擠壓模作為畢業設計有著實際的意義。
本文著重論述了擠壓模具的凸模和凹模的設計原則和設計思想，探討用更換凸凹模的方法來完成多個工序的擠壓，以降低模具的生產成本。另外，隨著科學技術的發展和計算機的日益普及化，計算機和制造業的聯系也越來越緊密，各種輔助設計軟件的使用將使塑性加工行業在未來有著更為廣闊的發展前景。

關鍵詞：擠壓，塑性成形，凸模，凹模

The pole that conduct electricity the design squeezes the molding tool

ABSTRACT
Pinch technology involved very wide range, this thesis main introduction pinch most basic content of design process of the mould. Include pushing the design step of the mould mainly among them , design the main point , design the detail and precautions.
Mould one production efficiency high craft equip , pinch mould take shape as one of mould field have important status very in plasticity very. In addition take shape with others technology compare with, pinch and process the advantage with high yield, high-quality, low consumption, have high use value choose and pinch mould have actual meanings as graduation project very economically in technology.
With the development of science and technology and popularization day by day of the computer, the connection between the computer and processing industry is closer and closer, various kinds of auxiliary appearances which design the software will make the processing industry of plasticity have wider development prospects in the future .

Keyword: The cold is pushed, hot extrusion, concave mould , protruding mould

目 錄

畢業設計（論文）任務書…………………………………………1
第一章 工藝方案的確定…………………………………………2
§1.1 制件圖……………………………………………………2
§1.2 工藝分析……………………………………………………3
§1.3 工藝方案的確定……………………………………………………3
§1.4 工藝方案的校核……………………………………………………3
§1.5 毛坯的選擇和制備……………………………………………4
第二章 工藝參數的計算……………………………………………6
§2.1 單位擠壓力的計算………………………………………………6
§2.2 總擠壓力的計算………………………………………………7
§2.3 壓力設備的選擇…………………………………………7
第三章 模具設計…………………………………………9
§3.1 模具結構形式的選擇……………………………………9
§3.2 模具工作部分的設計………………………………10
§3.3 組合凹模的設計與優化………………………………12
§3.4 凸凹模材料的選擇和熱處理…………………………13
§3.5 頂出裝置的設計……………………………………13
§3.6 模具閉合高度與開模行程的校核……………………14
第四章 毛坯與模具的潤滑和軟化處理……………………15
§4.1 擠壓過程…………………………………………15
§4.2 毛坯與模具的潤滑……………………………………15
§4.3中間退火軟化…………………………………………15
總結………………………………………………………………16
參考文獻…………………………………………………………17
致謝…………………………………………………………………18