畢業設計 CA6140數控改裝設計
論文設計說明書共31頁，字?jǐn)?shù)總計：14602
資料簡介：
車床橫向進給絲杠螺母1.dwg
車床橫向進給絲杠螺母.dwg
A3-主軸.dwg
A0-裝配圖.dwg
A3-帶輪.dwg
A3-調節盤.dwg
A3-齒輪.dwg
A3-自動刀架.dwg
開題報告.doc
畢業論文正文.doc
目錄.doc
實習報告.doc
畢業設計任務書.doc
實習報告封面.doc
封面.doc
摘要.doc
摘要: 隨著我國工業生產的發展,機械工業即將面臨著一個十分重要的課題----設備改造。本設計就是對CA6140車床的機械部分，進行數控改造。數控改造主要是簡化機械傳動機構、縮短傳動鏈、提高自動化程度，也是為了解決復雜的零件加工、精度控制及提高產品質量和生產率。在設計內容上，主要針對傳動系統圖和進給系統的改造設計、以及導軌和自動轉位刀架的改造設計等。
目前,經濟型數控機床,仍然是我國市場經濟需要量最大、銷售量最高。在利用我國現有的大量閑置舊機床，對舊機床進行數控化改造，研制出一種新型高效、多能的經濟型數控機床，是一種推陳出新、盤活存量資金的有效方法和低成本自動必由之路。
關鍵詞: 創新設計、數控改裝、主軸、刀架、導軌、數控裝置、進給系統
Original machinery design——the numerical control reformation of the design of CA6140( machinery design)
Jiang Yan
(Grade2002, department of Mechanical and electronic engineering,
Shaoyang University, Shaoyang, Hunan 422004 )
Summary: With the development of industrial production of our country, the mechanical industry will face a very important subject soon ----the equipment transformation. It means simplify mechanical drove, control precision, and improve the product quality and productivity by shortening drive chain, raising automatic degree. At designing content, mainly, control and improve the product quality and productivity for solving complicated part processing, precision too. At designing content, mainly focus on the transformation of the system design and the transformation of the location of the knife and guide.
At present, economy numerical control lathe is still the lather which is required most heavy and sold at the largest volume. Based on that utilize the large amount of unused old lathe, carry on the numerical control transformation to the old lathe , develop one new type high efficient , multi-functional economy numerical control lathe are the best and only way to low coat and stock of fund.
Key word: Original design, Numerical control reformation, Main shaft, Knife rest, Guide, Numerical control device, Enter to the system.
目 錄
引言 ………………………………………………………………………………… 1
CK6140數控車床主要技術參數 ……………………………………………… 2
第1章總體設計方案的確定 …………………………………………………… 3
第2章傳動系統的確定 …………………………………………………………4
第2．1節轉速圖的擬定 ………………………………………………………… 5
第2．2節傳動系統的確定 ……………………………………………………… 8
第2．3節皮帶輪的設計 …………………………………………………………9
第2．4節齒輪的設計 …………………………………………………………… 11
第2．5節軸的結構的設計 …………………………………………………… 13
第2．6節軸承的改造設計 …………………………………………………… 14
第2．7節主軸脈沖發生器 …………………………………………………… 14
第2．8節主軸電機的選擇 ……………………………………………………15
第2．9節其它輔助設備的改造設計 ………………………………………… 16
第3章進給系統改造設計 ……………………………………………………… 17
第3．1節概述 ……………………………………………………………………17
第3．2節傳動系統改造設計與計 …………………………………………… 17
第3．3節進給系統的安裝與調整 …………………………………………… 25
第4章導軌的改造設計算 ……………………………………………………… 26
第5章自動轉位刀架的改造設計 ………………………………………………27
第6章可控電動尾座設計 ……………………………………………………… 28
設計總結 ……………………………………………………………………………29
參考文獻 ………………………………………………………………………………30
致謝 ……………………………………………………………………………………31