畢業設計：接觸墊片雙側刃沖孔落料級進模設計
論文說明書共30頁，字?jǐn)?shù)總計：13408
資料簡介：
畢業設計說明書：接觸墊片雙側刃沖孔落料級進模設計.doc
A0-模具裝配圖.dwg
A3-凹模.dwg
A4-小沖孔凸模.dwg
A4-卸料螺釘.dwg
A4-大沖孔凸模.dwg
A3-卸料板.dwg
A4-墊板.dwg
A4-圓柱螺釘.dwg
A3-凸模固定板.dwg
A4-落料凸模.dwg
A4-接觸墊片.dwg
A4-防轉銷.dwg
摘 要
本次課程設計的任務我選的是接觸環零件沖壓工藝分析和模具的具體結構設計。通過查閱了相關文獻資料，對接觸環零件進行工藝性分析，選擇并確定符合于給定條件的最優工藝方案，及進行了工藝與設計的有關計算，如：選擇基本工序，確定其順序、工序數目及工序組合形式。介紹了主要零部件的設計理念，詳細剖析了設計過程中一些思路，以及某些非標準零件的使用特點。闡述了工位級進模的設計要點, 使產品質量達到設計要求。然后以此為基礎，設計出沖壓模具主要零件的結構。并在設計中，介紹了零件的排樣圖、定位設計、沖裁力的計算和壓力中心的計算。
分析了沖模模架的基本類型，討論了沖模模架的技術要求，介紹了標準模架的裝配工藝。并指出了模架裝配時的注意事項。條料的步進定位是一個很重要的工序，其對工件的精度影響很重要，因此對其設計的準確性與標準性對模具既有利于模具維修的規范化，也為整個模具的順利生產打下了一個良好的基礎。同時凸、凹模結構對產品生產質量影響也很大，在提高經濟效益和降低成本的前提下，設計出合理而簡單的凸、凹模結構是設計中的重要環節。
關鍵詞:接觸環；級進模；整形；排樣；鑲件；沖模模架；技術條件；裝配工藝
Abstract:

The design is focus on both the analysis of Pressing technics of the contact plate and the particular configuration design of die. According to check with a great deal of reference details . It is a must to base on the technical analysis of the patch, then choose a best craft procedure to a given project. For instance, basic procedure's choosing, basic procedure's sequence confirmation , the amount of the working procedure and the format of the procedure combination. Presentation of the main components of the design concept, a detailed analysis of the design process in a number of ideas, as well as the use of certain features of non-standard parts On-position progressive die design features, so that the quality of products meet the design requirements. And then as a basis for designing the main parts stamping die structure. And design, introduced the nesting parts map, location design, the calculation of punching force and the calculation of center of pressure.
Analysis of the die of the basic types of mold, die mold discussed the technical requirements on the standard mold of the assembly process. And pointed out that when the mold assembly of attention. Be expected to step positioning is a very important process, and its impact on the accuracy of the workpiece is very important, so the accuracy of their design on the mold with the standard of maintenance of both the standardization of mold, but also for the smooth production of the mold and lay a good foundation. At the same time, convex, concave mold structure of the product quality of a great impact in improving the economic efficiency and reduce costs under the premise of the design of a reasonable and simple, convex, concave mold structure is an important part of the design.
Key words: contact chip; progressive die; plastic; nesting; Inserts; die mold; technical conditions; assembly process

目 錄

摘 要 I
ABSTRACT: II
目 錄 III
前 言 1
1 設計主題 3
2 零件的工藝性分析 3
2.1 結構尺寸與精度 3
2.2 材料與批量 3
2.3 確定沖裁工藝方案 4
3 確定模具總體結構方案 5
3.1模具類型與定位方式 5
3.2 卸料與出見件方式 5
3.3模架類型及精度 5
4 工藝與設計計算 6
4.1 排樣設計與計算 6
4.2計算沖壓力與壓力中心，初選壓力機 8
4.3 模具閉合高度的確定和壓力機的校驗 9
4.4 計算凹、凸模刃口尺寸及公差 9
4.4.1落料凹模刃口尺寸 10
4.4.2沖孔凹模刃口尺寸 10
4.4.3側刃孔尺寸 10
4.5 工序的確定與排序 10
5 設計選用模具零、部件，繪制模具總裝圖 11
5.1 凹模設計 11
5.2 凸模設計 12
5.3 模柄的選擇 14
5.4 彈簧的選擇 14
5.5 其它主要零部件的尺寸規格 15
5.6 繪制模具總裝草圖及非標準模具零件圖 16
6 安全保護裝置 18
6.1防止制件或廢料的回升或堵塞裝置 18
6.2 模面制件的清理 19
7 模具零件材料的選擇及制定加工工藝過程工藝卡 19
7.2 模具零件材料的選擇 19
7.2 制定加工過程工藝卡 20
8 沖模的裝配和調試 22
8.1 沖模裝配要領及過程 22
8.1.1 沖模裝配前準備工作 22
8.1.2 模具的裝配順序 22
8.2 沖模的試沖與調試 23
8.3 沖模試沖與調整的目的 23
9 結束語 24
謝 辭 25
參考文獻 26
附錄 26