150FM摩托車發動機裝配線設計

畢業設計說明書（論文）中文摘要

摘要
　　　隨著摩托車的普及，發動機的制造已經顯得尤為重要，發動機流水線裝配的工藝過程需借助裝配線進行，由于裝配工藝的好壞直接影響產品質量和發動機的生產速度，因此，發動機裝配線在整個生產過程中占有重要地位。發動機裝配線是否合理，直接影響了摩托車質量和產量。隨著摩托車行業的發展，本課題就是以摩托車發動機為研究對象，根據畢業設計任務書上的設計要求及通過對本課題的研究，以本校的現有資源為依托對發動機裝配線進行設計，針對實驗室教學的場地限制，在查看已有文獻的基礎上，設計整套摩托車發動機的裝配線。使之既符合本校實際教學需要。首先完成裝配線線體的設計。在線體的選擇上充分考慮了本校的實際情況。在此基礎上，設計了與裝配線線體相匹配的隨行夾具。本課題題的研究，最終要設計一項可以用于本校實驗室教學同時又適用于實際生產的摩托車發動機裝配線。因此，本課題具有很大的現實意義。
　　　
　　　
關鍵詞  裝配線  隨行夾具  發動機 

畢業設計說明書（論文）外文摘要

Title  The Assembly line Design of 150FM Motocycle Engine

Abstract
　　　With the popularity of motorcycles, motor manufacturing has been more important, the engine assembly line to another assembly line process, the assembly process as a result of a direct impact on product quality and production speed of the engine, the engine assembly line in the entire production process occupies an important position.Engine assembly line is reasonable, a direct impact on the quality and production motorcycle.As the motorcycle industry, this issue is to study motorcycle engine, according to mandate graduation project book of design requirements and through the study of this issue to the university's existing resources based on the design of the engine assembly line, for laboratory teaching space restrictions, in view of the basis of existing literature, the design of the entire motorcycle engine assembly line. So that the actual teaching is in line with our needs. Complete the body assembly line design. Selection on-line full account of the actual situation of the school. On this basis, the design of the assembly line and the accompanying body to match fixture.The title of the study subjects, and ultimately can be used to design a laboratory school for teaching at the same time, the actual production of the motorcycle engine assembly line. Therefore, this issue has great practical significance.

Keywords  assembly line   retinue jig   engine  
 

目   錄

1  引言……………………………………………………………………………………1
1.1  本課題研究依據和意義………………………………………………………………1
1.2  本課題相關的國內外研究現狀………………………………………………………1
1.3  本文的具體工作………………………………………………………………………2
2  摩托車發動機裝配線的線體設計…………………………………………………… 4
2.1  線體的總體設計………………………………………………………………………4
2.2  線體的具體設計………………………………………………………………………5
3  摩托車發動機裝配線的隨行夾具設計……………………………………………… 5
3.1  隨行夾具的總體設計…………………………………………………………………6
3.2  隨行夾具的具體………………………………………………………………………6
4  摩托車發動機裝配工藝編制 …………………………………………………………9
4.1  發動機的安裝工藝………………………………………………………………………9
4.2  發動機的拆卸工藝 ……………………………………………………………………13
結束語 ……………………………………………………………………………………19
致謝 ………………………………………………………………………………………20
參考文獻 …………………………………………………………………………………21