包括設計說明書，前期資料和設計圖紙

目  錄

1 引言……………………………………………………………………………………  1
1.1 秸稈粉碎機的國內外現狀…………………………………………………………  1
1.2 本機的特點及要求…………………………………………………………………  3
1.3 整機結構方案的確定………………………………………………………………  5
2 變速箱設計……………………………………………………………………………  8
2.1 傳動裝置的總體設計………………………………………………………………  8
2.2 變速箱箱體結構設計……………………………………………………………… 11
2.3 錐齒輪和齒輪軸的設計計算及校核……………………………………………… 12
2.4 變速箱齒輪軸的設計及其校核…………………………………………………… 16
2.5 齒輪軸上軸承的選擇及校核……………………………………………………… 18
2.6 主動軸和設計計算………………………………………………………………… 20
2.7 主動軸上軸承的選擇及校核……………………………………………………… 23
3 皮帶輪及皮帶護罩設計……………………………………………………………… 24
3.1 帶傳動的概述……………………………………………………………………… 24
3.2 主被動帶輪的設計………………………………………………………………… 24
4 張緊輪部件設計……………………………………………………………………… 27
5 飛輪及飛輪護蓋設計………………………………………………………………… 28
6 方管單叉設計………………………………………………………………………… 28
7 刀軸設計……………………………………………………………………………… 30
7.1 錘爪的設計………………………………………………………………………… 30
7.2 動刀的排列………………………………………………………………………… 30
7.3 定刀設計…………………………………………………………………………… 33
8使用說明書…………………………………………………………………………… 34
8.1主要用途…………………………………………………………………………… 34
8.2主要結構…………………………………………………………………………… 34
8.3安裝，調試和使用………………………………………………………………… 36
8.4維護與保養………………………………………………………………………… 39
結論……………………………………………………………………………………… 39
致謝……………………………………………………………………………………… 40
參考文獻………………………………………………………………………………… 41
　

畢 業 設 計（論文） 中 文 摘 要

　　　 隨著我國農機產品的機械化進程的加快，玉米的機械化收獲也已提上了日程，從90年代開始，在引進國外技術和國內外農業科研成果的基礎上，先后研究開發了機械化秸稈粉碎還田技術。這項技術有如下的好處：(1)爭農時，減少環境污染。(2)利用資源，增養地力(3)促進作物增產。
　　　本畢業設計的題目是：錘爪式秸稈粉碎機。其工作原理是：通過動刀片和定刀片的相配合，將進入機器內的玉米秸稈剪切、沖擊、撕裂成20—40毫米左右的碎秸稈，粉碎后的秸稈在離心力及重力作用下被拋出機外，均勻?yàn)⒉继镩g，為耕整地作業創造條件。本機型的特點是：工作幅度寬、效率高、秸稈粉碎后長度較小、結構緊湊、外形美觀、結實耐用、物美價廉，是農民朋友的理想農機產品。

關鍵詞：農機化,錘爪,粉碎技術

畢 業 設 計（論文） 外 文 摘 要

Title      Design of straw grinder                  

Abstract
The mechanization gain of the corn has been gone up to the calendar along with the course expedition of the mechanization of farming. From 90s on, we research and develop mechanization technology of straw stalk’s crush and give back to farmland. The advantages of the technology are as follows:
(1)save the time of gain, reduce the circumstance’s pollution.(2)make the best of the resources, increase the terra’s power.(3)promote the crop’s increase production.
   The subject of the design is the design of straw grinder.The work principle is: Cut strike and rip the corn stalk into about 20-40mm’s broken stalk by the match of the active reamer and the standing reamer, the broken stalk are pop out of the disintegrator under the acentric efforts and gravity, they are equably spread on the land, it creates conditions for plantation. The machine’s traits are: broad work scope; high efficiency; the broken stalk is small; compact configuration; handsome figuration; burliness and durable; it’s really a bargain and the farmers’ ideal farming machine production.

Keywords:The agriculture machine,Hammer-Claw,
Grinding Technology