本套畢業設計主要包括6張cad二維圖、PRO/E三維圖、開題報告、設計說明書。

目 錄

引 言
中文摘要 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉1
英文摘要 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉2
第1章 緒 論 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉3
1.1 我國塑料模具工業現狀 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉3
1.2 市場預測 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉3
1.3 今后的主要發展方向 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉4
第2章 塑件及其材料的分析和成型設備的選用 ┉┉┉┉┉┉┉┉┉┉┉┉5
2.1 塑件分析┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉5
2.2 塑件材料的分析 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉5
2.2.1 聚碳酸酯的化學和物理特性 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉5
2.2.2 聚碳酸酯的成型特性 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉6
2.2.3 聚碳酸酯的成型工藝參數 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉6
2.3 成型設備的選用 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉8
2.3.1 確定成型方法 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉8
2.3.2 明確塑件批量 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉8
2.3.3 塑件的體積和質量 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉8
2.3.4 注射機的選用及其參數 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉8
第3章 模具方案設計 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉10
3.1 設計方案的選擇 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉10
3.2 分型面的選擇 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉10
3.3 凹、凸模零件工作┉尺寸的設計 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉11
3.3.1 Pro/E 模具組件設計的一般步驟 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉11
3.3.2 凹、凸模零件工作尺寸的計算公式 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉12
3.3.3 計算修正系數 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉12
3.4 型腔壁厚、底板厚度的確定 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉13
3.4.1 凹模型腔側壁厚度計算 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉13
3.4.2 承板厚度的確定 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉13
3.5 型芯以及推出抽芯機構的設計 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉14
3.5.1 型芯結構設計 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉14
3.5.2 推出抽芯機構的設計 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉15
3.6 排氣系統 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉15
3.7 模具熱交換系統設計 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉16
3.7.1 模具加熱系統的設計 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉16
3.7.2 冷卻系統的確定 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉17
第4章 結構零件的選擇設計 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉21
4.1 模架的選擇設計 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉21
4.2 澆注系統的設計 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉21
4.2.1 澆口套的選擇 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉21
4.2.2 冷料井的設計 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉22
4.2.3 分流道的設計 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉22
4.2.4 澆口的設計 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉23
4.3 導向與定位機構設計 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉24
4.3.1 導柱的選擇 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉24
4.3.2 導套的選擇 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉25
4.3.3 定位環的選擇設計 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉26
4.3.4 其他定位機構的設計 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉26
4.4 脫模機構的選擇設計 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉26
4.4.1 推出機構的選擇設計 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉26
4.4.2 推桿復位機構 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉27
4.4.3 拉料桿的選擇設計 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉27
第5章 相關參數的校核 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉28
5.1 注射機參數的校核 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉28
5.1.1 最大注射量的校核 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉28
5.1.2 注射壓力的校核 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉28
5.1.3 鎖模力的校核 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉28
5.2 注射機安裝尺寸的校核 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉29
5.2.1 可安裝的模具高度校核 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉29
5.2.2 模具定位圈與注射機定孔的配合 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉29
5.2.3 噴嘴尺寸 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉29
5.2.4 模具外形尺寸與注射機的拉桿間距校核 ┉┉┉┉┉┉┉┉┉┉┉┉29
5.3 抽芯距與抽拔力的校核 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉30.
5.3.1 抽芯距的校核 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉30
5.3.2 抽拔力的校核 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉30
5.4 開模行程的校核 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉31
結 論 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉32
參考文獻 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉33
致 謝 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉34


摘  要

隨著塑料工業的發展，社會對塑料制品的需求愈來愈大，若要生產出較好的塑料制品，必須有先進實用的塑料模具。近幾年來，汽車、摩托車行業模具需求將占國內模具市場的一半左右汽車、摩托車行業的發展將會大大推動模具工業的高速發展，特別是汽車覆蓋件模具、塑料模具和壓鑄模具的發展。針對這一行業發展趨勢，模具行業前景愈來愈廣闊，因此畢業設計指導老師為我指定了畢業設計題目——轎車前照燈燈罩的模具設計。
該篇畢業設計論文針對具體的零件進行模具設計，主要涉及到對塑件材料成型特性的分析、塑件的分析和模具方案的設計。其中模具方案設計又包括注塑機的選型、確定模具類型、型腔布置、確定分型面、設計澆注系統、選擇推出方式、側向分型和抽芯機構設計、熱交換系統選擇、結構零件的選用、成型零件的結構設計和計算、各零件的校核以及注塑機參數的校核。

關鍵詞：  聚碳酸酯    側澆口    側型芯滑塊    斜滑塊      轎車燈罩   

Abstract

Along with the plastic industry development, the society is increasing severely to the plastic product demand, if produces the better plastic product, must have the advanced practical plastic mold. In the last few years, the automobile, the motorcycle profession mold demand will occupy the domestic mold market a half past one. About automobile, the motorcycle profession development can greatly impel the mold industry development have a highly speed, especially automobile cover mold, plastic mold and compression casting mold. In view of this profession development tendency, the mold profession prospect is increasingly broad, therefore the graduation project instructed teacher to assign in front of the graduation project topic- passenger vehicle for me the illuminator chimney mold design.
 This graduation project paper carries on the mold design of prescribed parts, mainly involves to models material to take shape the characteristic analysis, models analysis and the mold plan design. Mold plan design includes the casting machine shaping, the determination mold type, the cavity arrangement, the true parting line, the design pours the system, the choice promotes the way, lateral dividing and pulls out the core organization design, the heat-exchange system choice, the constructional detail selects, takes shape the components structural design and the computation, various components examination as well as the casting machine parameter examination.
Key word: polycarbonate    edge gate    side core-slide    angled-lift splits      Car louver