高速電路板級SI、PI與實踐



目  錄

一 論文正文

1緒論 1

  1.1 SI與PI基本原則 1

    1.2 信號完整性分析、電源完整性分析簡介 2

2 SI的仿真與設計 3

    2.1 信號完整性分析定義與對象 3

    2.2 信號完整性問題 4

  2.3 SI的HyperLynx 仿真 13

3 PI仿真與設計 23

  3.1 概述 23

  3.2 電源系統的噪聲來源與電容的退耦 24

  3.3 PI的仿真分析 27

4總結與實例 32

參考文獻 34

謝辭 35

二 附錄

論文（設計）任務書 36

論文（設計）結題報告 38

論文（設計）成績評定及答辯評議表 40

論文（設計）答辯過程記錄 42

摘要：隨著PCB 設計越來越復雜，設計周期越來越短，信號完整性仿真分析正變得越來越重要。本文簡介了信號完整性針對的基本問題，介紹了基于信號完整性仿真分析的高速PCB設計方法，并結合一個高速PCB 設計案例，通過Mentor Graphics公司電路系統仿真工具——HyperLynx，對高速板級電路進行仿真。研究通過改變傳輸線參數、干擾源、地平面介質對串?dāng)_的影響。根據PCB廠家的制版參數匹配出阻抗線。仿真分析出層間結構、布局、布線規則和一些端接方案，完成仿真板級結果。

關鍵詞：信號完整性；信號完整性仿真 IBIS；串?dāng)_；傳輸線；HyperLynx仿真

High-speed circuit board level SI、PI and practice

Abstract: with the PCB design more and more complex, the design cycle more and more short, signal integrity simulation analysis is becoming more and more important. In this paper are introduced the signal integrity in the basic problem, introduces the simulation analysis based on signal integrity of the PCB design method, and combining with a high speed PCB design case, through the Mentor Graphics company circuit system simulation tools-HyperLynx, for high-speed circuit board level simulation. Research by changing the parameters of the transmission line, interference sources, ground plane media on the influence of crosstalk. According to the PCB manufacturer plate parameters matching the impedance line. The simulation analysis between the layer structure, layout and wiring rules and some termination program, complete simulation board level results.

Key words:Signal Integrity（SI ）;SI Simulation;IBIS;Crosstalk;transmission lines;HyperLynx simulation