Zigbee無線智能溫室控制系統設計

1.57萬字
自己原創的畢業論文，僅在本站獨家出售，重復率低，推薦下載使用

摘要： 無線傳感器網絡技術是二十一世紀最重要的技術之一，并越來越多地應用于農業生產。ZigBee技術作為一種短距離、低傳輸數據速率下電子設備間的無線通信技術，具有低成本、低功耗、自組網等優點，比較適用于設施農業溫室管理。為了解決傳統溫室測控系統有線連接方式的局限性，本文基于ZigBee技術設計了一種溫室無線測控系統。
本文采用帶有ZigBee協議棧的CC2530模塊為系統核心，首先設計了基于ZigBee的無線數據采集節點，對溫室內的溫度環境參數進行數據采集，同時構建了ZigBee無線網絡，實現了采集數據的無線傳輸。然后對接收到的溫度數據進行處理，實現了溫度自動控制的算法，最后通過對節點的繼電器輸出控制風扇來達到對溫度的控制。
本文第一部分講述了基于ZigBee的無線傳感系統，主要對ZigBee技術進行了簡單的介紹，以及CC2530模塊和編程方法。第二部分描述了系統的硬件結構設計。第三部分詳細描述了軟件設計過程。最后進行系統調試和總結。

關鍵詞：溫室 測控系統 無線傳感器網絡 ZigBee


Design of wireless intelligent greenhouse control system based on Zigbee
Abstract Wireless sensor network technology is one of the most important techniques in twenty-first Century, and are increasingly used in agricultural production. ZigBee technology is a kind of electronic equipment, short distance data transmission rate of the wireless communication technology, has the advantages of low cost, low power consumption, ad hoc network etc., is suitable for agriculture greenhouse management. In order to solve the traditional measurement and control system of greenhouse cable connection mode limitations, a Greenhouse Wireless Measurement and control system is designed based based on the ZigBee technology In this paper.
This paper uses the CC2530 module with ZigBee protocol stack as the system core, we designed the wireless data acquisition node based on ZigBee in order to colllect the temperature of the environment parameters in greenhouse data , and then build a ZigBee wireless network to achieve a wireless transmission of data collection . Then the temperature data received for processing, realize the automatic temperature control algorithm, the node relay output control to achieve the temperature control fan.
In the first part of this paper describes the wireless sensor system based on ZigBee, mainly a brief introduction to ZigBee, introduce the CC2530 module and the programming method. The second part introduces the hardware structure design. The third part introduces the part of software design. Finally, debugging.

Key words Greenhouse Measurement and control system Wireless Sensor Network ZigBee


目 錄
第一章 緒 論 1
1.1 課題意義 1
1.2 國內外研究進展 2
1.2.1智能溫室系統的國外研究發展現狀 2
1.2.2智能溫室系統的國內研究發展現狀 3
1.3 論文主要研究內容 5
第二章 基于Zigbee的無線傳感系統 7
2.1 ZigBee簡介 7
2.1.1 ZigBee特性 7
2.1.2 ZigBee性能 9
2.2 CC2530簡介及編程方法 9
2.2.1 CC2530模塊說明 10
2.2.2 CC2530引腳描述 12
第三章 系統硬件設計 15
3.1 系統結構原理 15
3.2 各模塊設計 15
第四章 軟件設計 23
4.1 ZigBee技術軟件開發環境 23
4.2 溫室系統軟件設計 23
第五章 系統調試與分析 32
5.1 協調器模塊的調試 32
5.2 終端模塊的調試 32
第六章 總結 36
致謝 37
參考文獻 38
附錄A 40