摘 要
歷經百年的軋鋼工業和技術發展，在進入21世紀時，正因為得到高新技術的改造而繼續發展。以機架為特征的連續變化軋鋼技術，在可預見的未來仍將是鋼鐵業鋼材成型的支柱技術，地位不會動搖，機架技術的本質不會改變。鋼的性能潛力將通過工藝過程控制優化而得到充分發揮。高新技術的應用將成為必然的發展途徑。競爭的要求和技術的發展，必然會使軋鋼工業實現高速度，快節奏的技術開發和成果轉化。21世紀對軋鋼工業和技術將是光明的，高新技術的注入將改變軋鋼工業和技術的面貌。
本文對軋鋼機，軋鋼生產，冷軋熱帶剛和型鋼的發展概況，六輥軋機的種類和各自的特點，軋輥以及機架等的相關知識等做了簡單的介紹。重點根據六輥冷軋機的工作情況對其機架進行材料、類型和各參數的初步設定，并根據材料力學的方法，作一系列假定來簡化模型，降低靜不定階數。再根據經驗公式對尺寸進行了強度剛度的校核，變形范圍的計算，驗證了設計的正確性。在此基礎上使用AUTOCAD進行機架裝配圖、輥系裝配圖和操作牌坊圖的繪制。
關鍵詞：冶金機械，軋鋼機，冷軋機，六輥，機架牌坊















ABSTRACT
In the 21st century, steel rolling industrial and technological have continued to develop because of the high-tech transformation. To stand for the continuous changes in rolling technology, in the future, the machine rack technology will continue to be the backbone of technology in the steel industry. The status of this technology will not be shaken and also the essence of the machine rack technology will not be changed. The performance of steel will be brought into full play through the process of optimization of control. Application of new technology will become an inevitable approach to development. Because of the competition requirements and technical development, the steel rolling industry will enable to develop by high-speed. The 21st century is the golden development period for the rolling industry. With the injection of high-technology, steel rolling industry and technology will be able to change the status quo.
In this paper, the author brief introduction about rolling mill, the production of rolling mill, tropical and cold-rolled steel just the state of development, 6-high mill of the type and every characteristic and so on. This paper according to the work condition of the six roll cold rolling mill to select the rack’s material and type. This paper also according to material mechanics and the theory to take a series of assumptions order to simplify the model to reduce static indefinite. After that this paper to check the size of the strength and the stiffness by the empirical formula. In the end, this paper verify the correctness of the design and base on this design, the author use the AUTOCAD software to protract the assembly map of the machine rack, the assembly map of roll.
Key words： Metallurgical Machinery, Rolling mill, cold rolling mill, six rolls



目 錄
中文摘要 Ⅰ
ABSTRACT Ⅱ
1緒論 1
1.1 概論 1
1.2 軋鋼技術發展前景 1
2六輥軋機的結構及參數介紹 3
2.1 六輥軋機的結構 3
2.1.1 機架裝配 3
2.1.2 工作輥 3
2.1.3工作輥彎輥 4
2.1.4 中間輥 4
2.1.5 中間輥橫移及彎輥 4
2.1.6 支承輥輥系及平衡 5
2.1.7 軋制標高調整裝置 5
2.2 六輥冷軋機的參數 5
2.2.1軋機機架剛度 5
2.2.2平直度調整范圍 5
2.2.3帶鋼焊接接頭處的平直度 5
3 軋鋼機主傳動設計 7
3.1 軋鋼機主傳動裝置組成 7
3.1.1 減速機 8
3.1.2 齒輪座 8
3.1.3 聯接軸 8
3.1.4聯軸節 8
3.2軋鋼機主傳動的類型 9
3.2.1單機座軋鋼機主傳動裝置類型 11
3.2.2多機座（或多列式）軋鋼機主傳動裝置類型 12
3.3軋鋼機主傳動方案設計 13
3.3.1電動機 13
3.3.2聯軸器 13
3.3.3萬向接軸 13
4 輥系設計 15
4.1軋輥類型與結構 15
4.2軋輥尺寸參數 16
4.2.1板帶軋機軋輥的L與D 16
4.2.2各種軋輥的重車率 16
4.2.3軋輥輥頸尺寸d與l的確定 17
4.3軋輥材料及輥面硬度 17
4.3.1 常用的軋輥材料 17
4.3.2軋輥材料的選擇和輥面硬度 17
5 機架設計 19
5.1機架的類型及結構 19
5.1.1 機架的類型 19
5.1.2機架的主要結構參數 20
5.1.3機架的結構特點 21
5.2機架的選擇 27
5.3機架的尺寸參數的初定 27
5.3.1機架的基本尺寸的決定的條件 27
5.3.2機架參數的初步設定 27
5.4機架的強度和變形計算 27
5.4.1機架的強度計算 28
5.4.2機架變形計算 31
5.5機架材料和許用應力計算 33
5.6機架傾翻力矩計算 34
5.6.1傳動系統加于機架的傾翻力矩 34
5.6.2支座反力計算 34
5.6.3地腳螺栓的強度校核 35
結語 36
謝辭 37
參考文獻 38