摘 要

本文是在國家“九五”科技攻關項目“大型塔式起重機及其關鍵配套設備”獲得重大研究成果這一大背景下提出的。因此，它的針對性和實用性強，潛在的社會效益和經濟效益大。
文中以QTZ315型塔式起重機為例，根據塔式起重機設計規范和剛結構計算理論，對塔身結構進行了深入的受力分析，將塔身看作空間桁架結構從而得到有效的簡化模型，研究了塔身整體強度、剛度、整體穩定性及單肢、腹桿穩定性校核過程中參數的選擇。
本文針對以往主要依靠經驗來確定塔身主要參數的傳統設計方法，提出了采用以數學規劃為理論基礎的最優化方法對塔身進行結構優化設計，該方法是進行結構優化設計的一種有效方法，經濟效果顯著，對提高設計質量有著重大意義。


關鍵詞：塔式起重機塔身，結構分析，優化設計，數學規劃法
















ABSTRACT

The thesis is submitted under this big background that the research project “Large Tower Crane and Its Accordant Technique” has gained significant research production, which is the “95” national major research project of science and technology. Therefore, it has strong practicability and definite purpose, and has greater potential benefit both in the social and economical fields.
In this paper, using the QTZ315 tower crane an example, in line with the tower crane design specification and steel-structure theory, the tower body structure’s further mechanic analysis has been conducted, focusing on the corresponding parameter selection during checking strength, stiffness and stability of the whole tower body, which views the tower body as the trussed construction of space to get the effective simplification model thereby.
Relied the traditional design methods which determine the main parameters of the shaft, this paper submit a theory based on mathematical programming for the optimization of the structural optimization of shaft design. Be method's turn to be that effective method, economic results carrying out one kind that structural optimization designs are notable, have great importance to raising design mass.


Key words： tower crane mast, structural analysis, optimal design, mathematical programming










目 錄

中文摘要 Ⅰ
ABSTRACT Ⅱ
1緒論 1
1.1 國內外塔式起重機發展概況 1
1.1.1 國外塔式起重機的發展?fàn)顩r 1
1.1.2 我國塔式起重機發展歷史和現狀 2
1.2 塔式起重機的組成與類型 3
1.2.1 塔式起重機的組成 3
1.2.2 塔式起重機的類型 4
1.3 本課題的研究背景 6
1.4 問題的提出及本論文的主要內容 6
2 塔身的受力分析 8
2.1 塔身力學模型的建立 8
2.2 載荷分析 8
3 塔身優化設計研究 11
3.1 優化設計概述 11
3.2 優化設計數學模型 12
3.2.1 設計變量的確定 13
3.2.2 目標函數的制定 15
3.2.3 約束條件的擬定 15
4 QTZ315塔式起重機塔身結構的優化設計 20
4.1 QTZ315塔機簡介 20
4.2 QTZ315獨立式塔式起重機塔身優化設計 20
4.2.1 優化設計目標函數及約束條件的確定 21
4.2.2 優化模型的分析與建立 24
4.2.3 優化模型的求解 25
5 結論 27
致謝 28
參考文獻 29
附錄Ⅰ：MATLAB程序代碼 30